USB_Laptop_Keyboard_Controller/Example_Touchpads/Readme.txt

14 lines
1.3 KiB
Text
Raw Normal View History

2020-09-26 00:42:44 +03:00
This code can be used on the LC and 4.0 but they need a level translator if connected to a 5 volt touchpad.
The Touchpad_3p2.ino code sets up the touchpad to be in remote mode so that the Teensy can poll it after finishing the keyboard scan.
The Touchpad_Stream_mode.ino code sets up the touchpad to be in Stream Mode so it sends data when ever it detects finger movement.
2021-10-09 21:11:44 +03:00
ADB_Trackball.ino will read an Apple Data Bus trackball and send the results as USB mouse commands.
2021-11-03 09:59:43 +03:00
Fujitsu_Ergotrac.ino uses the ADC in the Teensy 3.2 to read the X and Y capacitive sensor.
2021-10-21 00:42:05 +03:00
I2C_Touchpad.ino is an example routine to read a basic touchpad over an I2C bus and send the results as USB mouse commands.
2021-10-09 21:11:44 +03:00
Read the comments at the beginning of the code to see the address and register numbers for this example touchpad.
2021-10-21 00:42:05 +03:00
Azoteq_TP.ino uses the Teensy I2C pins to read an Azoteq TPS65-201A-S touchpad and send the relative X/Y movement
and the finger-tap as USB mouse commands. For more information on the registers, read the Azoteq data sheet at:
https://www.azoteq.com/images/stories/pdf/iqs5xx-b000_trackpad_datasheet.pdf
2021-10-09 21:11:44 +03:00
2020-09-26 00:42:44 +03:00
For a complete description of how to interface a Teensy to a touchpad, read my touchpad guide at:
https://www.hackster.io/frank-adams/laptop-touchpad-conversion-to-usb-d70519