2020-04-19 19:34:31 +03:00
The following Eagle files can be sent directly to OSHPark.
2020-09-25 08:51:50 +03:00
Keyboard_Scanner.brd EagleCad circuit board file for Teensy LC or 3.2. Original layout shown in the video. Use the LT2 board instead.
2020-04-19 19:34:31 +03:00
2020-09-25 08:51:50 +03:00
Keyboard_Scanner_LT.brd EagleCad file same as above with 2 bit Level Translator for touchpad Clock and Data on Teensy LC side. Use the LT2 board instead.
2020-04-19 19:34:31 +03:00
2020-06-10 01:05:10 +03:00
Keyboard_Scanner_LT2.brd EagleCad file same as above with improved hole spacing for using right angle header on Teensy 3.2 backside signals
2020-04-19 19:34:31 +03:00
Keyboard_Scanner_LT_0p5.brd EagleCad file same as above except made for a 0.5mm pitch FPC connector
Keyboard_Scanner_Dual.brd EagleCad file is for keyboards with dual FPC cables
Keyboard_Scanner_4p0.brd EagleCad file for Teensy LC or 4.0
2021-10-08 22:01:59 +03:00
Keyboard_Scanner_LC_thruhole.brd EagleCad file for thru-hole 1mm pitch FPC cables with up to 26 pins.
TeensyLC_1p25.brd EagleCad file for thru-hole 1.25mm pitch FPC cables with up to 26 pins.
2020-04-28 23:16:37 +03:00
2020-06-09 08:20:02 +03:00
Keyboard_Scanner_2pp.brd EagleCad file for Teensy ++2.0
2020-09-25 08:51:50 +03:00
FPC_8pin1mm.brd EagleCad file for 8 pin 1mm breakout board
FPC_10pin0p5mm.brd EagleCad file for 10 pin 0.5mm breakout board
2020-09-28 03:17:29 +03:00
FPC_18pin1mm.brd EagleCad file for 18 pin 1mm, 0.8mm, or 0.5mm breakout board
2021-09-18 07:21:31 +03:00
Teensy3p2Cutout.brd EagleCad file has a cutout in the board so the Teensy 3.2 will sit flush instead of on top of the board.
2021-10-29 07:06:27 +03:00
iBookG3Cutout.brd EagleCad file is the same as above but with a 40 pin connector specifically for the iBookG3 keyboard.
2020-09-25 08:51:50 +03:00
The Zipped gerber files for the above boards can be sent directly to PJRC for fabrication
2021-10-29 07:06:27 +03:00
