medvedych/USB_Laptop_Keyboard_Controller
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Delete Lenovo_T61_KBandTP.ino

Browse source
This commit is contained in:
Frank Adams 2018-11-30 23:50:37 -08:00 committed by GitHub
parent 7a96779493
commit 4e5c6f9702
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 0 additions and 730 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

730
Example_Keyboards/Lenovo_T61_KBandTP.ino
View file

@ -1,730 +0,0 @@
/*
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
// It controls a Lenovo ThinkPad T61 Laptop Keyboard and PS/2 Trackpoint using a Teensy 3.2 on
// a daughterboard with a 44 pin FPC connector. The keyboard part number is 42T3177.
// This routine uses the Teensyduino "Micro-Manager Method" to send Normal and Modifier
// keys over USB. Only the volume control multi-media keys are supported by this routine.
// Description of Teensyduino keyboard functions is at www.pjrc.com/teensy/td_keyboard.html
// The PS/2 code for the Trackpoint was originally from https://playground.arduino.cc/uploads/ComponentLib/mouse.txt
// but the interface to the host was changed from RS232 serial to USB using the PJRC Mouse functions.
// A watchdog timer was also added to the "while loops" so the code can't hang if a clock edge is missed.
// In the Arduino IDE, select Tools, Teensy 3.2. Also under Tools, select Keyboard+Mouse+Joystick
//
// Revision History
// Initial Release Nov 23, 2018
//
// Trackpoint signals
#define MDATA 18 // ps/2 data to trackpoint
#define MCLK 19 // ps/2 clock to trackpoint
#define MRESET 0 // active high trackpoint reset at power up
// Keyboard LEDs
#define CAPS_LED 28 // Wire these 3 I/O's to the anode side of LED's
#define NUM_LED 29 // Wire the cathode side thru a dropping resistor
#define SCRL_LED 30 // to ground.
#define BLINK_LED 13 // The LED on the Teensy is programmed to blink
// Keyboard Fn key (aka HOTKEY)
#define HOTKEY 14 // Fn key plus side
#define HOTKEY_RTN 23 // Fn key minus side (always driven low in this routine)
// sync signal for measuring scan frequency
#define SYNC 27
// Set the keyboard row & column size
const byte rows_max = 16; // sets the number of rows in the matrix
const byte cols_max = 8; // sets the number of columns in the matrix
//
// Load the normal key matrix with the Teensyduino key names described at www.pjrc.com/teensy/td_keyboard.html
// A zero indicates no normal key at that location.
//
int normal[rows_max][cols_max] = {
{KEY_TILDE,KEY_1,KEY_Q,KEY_TAB,KEY_A,KEY_ESC,KEY_Z,0},
{KEY_F1,KEY_2,KEY_W,KEY_CAPS_LOCK,KEY_S,0,KEY_X,0},
{KEY_F2,KEY_3,KEY_E,KEY_F3,KEY_D,KEY_F4,KEY_C,0},
{KEY_5,KEY_4,KEY_R,KEY_T,KEY_F,KEY_G,KEY_V,KEY_B},
{KEY_6,KEY_7,KEY_U,KEY_Y,KEY_J,KEY_H,KEY_M,KEY_N},
{KEY_EQUAL,KEY_8,KEY_I,KEY_RIGHT_BRACE,KEY_K,KEY_F6,KEY_COMMA,0},
{KEY_F8,KEY_9,KEY_O,KEY_F7,KEY_L,0,KEY_PERIOD,0},
{KEY_MINUS,KEY_0,KEY_P,KEY_LEFT_BRACE,KEY_SEMICOLON,KEY_QUOTE,0,KEY_SLASH},
{KEY_F9,KEY_F10,0,KEY_BACKSPACE,KEY_BACKSLASH,KEY_F5,KEY_ENTER,KEY_SPACE},
{KEY_INSERT,KEY_F12,0,0,0,0,0,KEY_RIGHT},
{KEY_DELETE,KEY_F11,0,0,0,0,0,KEY_DOWN},
{KEY_PAGE_UP,KEY_PAGE_DOWN,0,0,KEY_MENU,0,0,0},
{KEY_HOME,KEY_END,0,0,0,KEY_UP,KEY_PAUSE,KEY_LEFT},
{0,KEY_PRINTSCREEN,KEY_SCROLL_LOCK,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0}
};
// Load the modifier key matrix with key names at the correct row-column location.
// A zero indicates no modifier key at that location.
int modifier[rows_max][cols_max] = {
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,MODIFIERKEY_GUI,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,MODIFIERKEY_LEFT_ALT,0,MODIFIERKEY_RIGHT_ALT},
{0,0,0,MODIFIERKEY_LEFT_SHIFT,0,0,MODIFIERKEY_RIGHT_SHIFT,0},
{MODIFIERKEY_LEFT_CTRL,0,0,0,0,0,MODIFIERKEY_RIGHT_CTRL,0}
};
// Load the media key matrix with key names at the correct row-column location.
// A zero indicates no media key at that location.
int media[rows_max][cols_max] = {
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,KEY_MEDIA_VOLUME_INC,KEY_MEDIA_VOLUME_DEC,KEY_MEDIA_MUTE,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0}
};
// Initialize the old_key matrix with one's.
// 1 = key not pressed, 0 = key is pressed
boolean old_key[rows_max][cols_max] = {
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1},
{1,1,1,1,1,1,1,1}
};
//
// Define the Teensy 3.2 I/O numbers
//
// Row FPC pin # 22,18,14,10,02,04,08,12,06,20,16,24,28,32,26,30
// Teensy I/O # 20,33,24,25,31,32,07,06,26,04,05,03,02,01,21,22
int Row_IO[rows_max] = {20,33,24,25,31,32,7,6,26,4,5,3,2,1,21,22}; // Teensy 3.2 I/O numbers for rows
//
// Column FPC pin # 05,13,09,07,11,03,15,17
// Teensy I/O # 16,10,12,17,11,15,09,08
int Col_IO[cols_max] = {16,10,12,17,11,15,9,8}; // Teensy 3.2 I/O numbers for columns
//
// Declare variables that will be used by functions
boolean trackpoint_error = LOW; // sent high when touch pad routine times out
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
int slot1 = 0; //value of 0 means the slot is empty and can be used.
int slot2 = 0;
int slot3 = 0;
int slot4 = 0;
int slot5 = 0;
int slot6 = 0;
//
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
int mod_ctrl_l = 0;
int mod_ctrl_r = 0;
int mod_alt_l = 0;
int mod_alt_r = 0;
int mod_gui = 0;
//
// *****************Functions for Trackpoint***************************
// Function to send the trackpoint a command
void trackpoint_write(char data)
{
char i;
char parity = 1;
// put pins in output mode
go_z(MDATA);
go_z(MCLK);
elapsedMillis watchdog; // set watchdog to zero
delayMicroseconds(300);
go_0(MCLK);
delayMicroseconds(300);
go_0(MDATA);
delayMicroseconds(10);
// start bit
go_z(MCLK);
// wait for trackpoint to take control of clock)
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// clock is low, and we are clear to send data
for (i=0; i < 8; i++) {
if (data & 0x01) {
go_z(MDATA);
}
else {
go_0(MDATA);
}
// wait for clock cycle
while (digitalRead(MCLK) == LOW) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
parity = parity ^ (data & 0x01);
data = data >> 1;
}
// parity
if (parity) {
go_z(MDATA);
}
else {
go_0(MDATA);
}
// wait for clock cycle
while (digitalRead(MCLK) == LOW) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// stop bit
go_z(MDATA);
delayMicroseconds(50);
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// wait for trackpoint to switch modes
while ((digitalRead(MCLK) == LOW) || (digitalRead(MDATA) == LOW)) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// put a hold on the incoming data.
go_0(MCLK);
}
//
// Function to get a byte of data from the trackpoint
//
char trackpoint_read(void)
{
char data = 0x00;
int i;
char bity = 0x01;
// start the clock
elapsedMillis watchdog; // set watchdog to zero
go_z(MCLK);
go_z(MDATA);
delayMicroseconds(50);
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
delayMicroseconds(5); // wait for clock ring to settle
while (digitalRead(MCLK) == LOW) { // eat start bit
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
for (i=0; i < 8; i++) {
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
if (digitalRead(MDATA) == HIGH) {
data = data | bity;
}
while (digitalRead(MCLK) == LOW) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
bity = bity << 1;
}
// ignore parity bit
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
while (digitalRead(MCLK) == LOW) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// eat stop bit
while (digitalRead(MCLK) == HIGH) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
while (digitalRead(MCLK) == LOW) {
if (watchdog >= 200) { //check for infinite loop
trackpoint_error = HIGH; // set error flag
break;
}
}
// put a hold on the incoming data.
go_0(MCLK);
return data;
}
void trackpoint_init()
{
trackpoint_error = LOW; // start with no error
go_z(MCLK); // float the clock and data to trackpoint
go_z(MDATA);
// Trackpoint Reset signal is active high. Start it off low to let power stabilize
go_0(MRESET); // drive low
delay(1000); // wait 1 second
go_1(MRESET); // drive High to activate Reset signal to trackpoint
delay(1000); // wait 1 second to give it a good long reset
go_0(MRESET); // drive Reset back to the inactive (low) state
delay(1000); // wait 1 second before proceeding so trackpoint is ready
// Sending reset command to trackpoint
trackpoint_write(0xff);
trackpoint_read(); // ack byte
// Read ack byte
trackpoint_read(); // blank
trackpoint_read(); // blank
// Sending remote mode code so the trackpoint will send data only when polled
trackpoint_write(0xf0); // remote mode
trackpoint_read(); // Read ack byte
delayMicroseconds(100);
}
//
// *****************Functions for Keyboard*****************************
// Function to load the key name into the first available slot
void load_slot(int key) {
if (!slot1) {
slot1 = key;
}
else if (!slot2) {
slot2 = key;
}
else if (!slot3) {
slot3 = key;
}
else if (!slot4) {
slot4 = key;
}
else if (!slot5) {
slot5 = key;
}
else if (!slot6) {
slot6 = key;
}
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
slots_full = LOW; // slots are not full
}
else {
slots_full = HIGH; // slots are full
}
}
//
// Function to clear the slot that contains the key name
void clear_slot(int key) {
if (slot1 == key) {
slot1 = 0;
}
else if (slot2 == key) {
slot2 = 0;
}
else if (slot3 == key) {
slot3 = 0;
}
else if (slot4 == key) {
slot4 = 0;
}
else if (slot5 == key) {
slot5 = 0;
}
else if (slot6 == key) {
slot6 = 0;
}
slots_full = LOW;
}
//
// Function to load the modifier key name into the appropriate mod variable
void load_mod(int m_key) {
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
mod_shift_l = m_key;
}
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
mod_shift_r = m_key;
}
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
mod_ctrl_l = m_key;
}
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
mod_ctrl_r = m_key;
}
else if (m_key == MODIFIERKEY_LEFT_ALT) {
mod_alt_l = m_key;
}
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
mod_alt_r = m_key;
}
else if (m_key == MODIFIERKEY_GUI) {
mod_gui = m_key;
}
}
//
// Function to load 0 into the appropriate mod variable
void clear_mod(int m_key) {
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
mod_shift_l = 0;
}
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
mod_shift_r = 0;
}
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
mod_ctrl_l = 0;
}
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
mod_ctrl_r = 0;
}
else if (m_key == MODIFIERKEY_LEFT_ALT) {
mod_alt_l = 0;
}
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
mod_alt_r = 0;
}
else if (m_key == MODIFIERKEY_GUI) {
mod_gui = 0;
}
}
//
// Function to send the modifier keys over usb
void send_mod() {
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
Keyboard.send_now();
}
//
// Function to send the normal keys in the 6 slots over usb
void send_normals() {
Keyboard.set_key1(slot1);
Keyboard.set_key2(slot2);
Keyboard.set_key3(slot3);
Keyboard.set_key4(slot4);
Keyboard.set_key5(slot5);
Keyboard.set_key6(slot6);
Keyboard.send_now();
}
// **************Functions common to keyboard and trackpoint**************************
//
// Function to set a pin to high impedance (acts like open drain output)
void go_z(int pin)
{
pinMode(pin, INPUT);
digitalWrite(pin, HIGH);
}
//
// Function to set a pin as an input with a pullup
void go_pu(int pin)
{
pinMode(pin, INPUT_PULLUP);
digitalWrite(pin, HIGH);
}
//
// Function to send a pin to a logic low
void go_0(int pin)
{
pinMode(pin, OUTPUT);
digitalWrite(pin, LOW);
}
//
// Function to send a pin to a logic high
void go_1(int pin)
{
pinMode(pin, OUTPUT);
digitalWrite(pin, HIGH);
}
//
//************************************Setup*******************************************
void setup() {
// ************trackpoint setup
trackpoint_init(); // reset trackpoint, then set it's resolution and put it in remote mode
if (trackpoint_error) {
trackpoint_init(); // try one more time to initialize the trackpoint
}
// ************keyboard setup
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
}
//
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
go_z(Row_IO[b]); // set each row pin as a floating output
}
//
go_0(HOTKEY_RTN); // Always drive the Hotkey return side low
go_pu(HOTKEY); // Pull up the Hotkey plus side for reading
//
pinMode(BLINK_LED, OUTPUT); // I/O 13 drives the LED on the Teensy
pinMode(SYNC, OUTPUT); // I/O 27 drives a scope for frequency measurement
}
//
// *******declare and initialize trackpoint variables
char mstat; // trackpoint status reg = Y overflow, X overflow, Y sign bit, X sign bit, Always 1, Middle Btn, Right Btn, Left Btn
char mx; // trackpoint x movement = 8 data bits. The sign bit is in the status register to
// make a 9 bit 2's complement value. Left to right on the trackpoint gives a positive value.
char my; // trackpoint y movement also 8 bits plus sign. trackpoint movement away from the user gives a positive value.
boolean over_flow; // set if x or y movement values are bad due to overflow
boolean left_button = 0; // on/off variable for left button = bit 0 of mstat
boolean right_button = 0; // on/off variable for right button = bit 1 of mstat
boolean middle_button = 0; // on/off variable for middle button = bit 2 of mstat
boolean old_left_button = 0; // on/off variable for left button status the previous polling cycle
boolean old_right_button = 0; // on/off variable for right button status the previous polling cycle
boolean old_middle_button = 0; // on/off variable for middle button status the previous polling cycle
boolean button_change = 0; // Active high, shows when any trackpoint button has changed since last polling cycle
// **********declare and initialize keyboard variables
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
extern volatile uint8_t keyboard_leds; // 8 bits sent from Host to Teensy that give keyboard LED status.
char blink_count = 0; // Blink loop counter
boolean blinky = LOW; // Blink LED state
boolean sync_sig = LOW; // sync pulse to measure scan frequency
//
//*********************************Main Loop*******************************************
//
void loop() {
// *************Keyboard Main**************
// Read the Fn key (aka Hotkey) which is not part of the key matrix
if (!digitalRead(HOTKEY)) {
Fn_pressed = LOW; // Fn key is pressed (active low)
}
else {
Fn_pressed = HIGH; // Fn key is not pressed
}
//
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
// The keyboard keys will read as logic low if they are pressed (negative logic).
// The old_key matrix also uses negative logic (low=pressed).
//
for (int x = 0; x < rows_max; x++) { // loop thru the rows
go_0(Row_IO[x]); // Activate Row (send it low)
delayMicroseconds(10); // give the row time to go low and settle out
for (int y = 0; y < cols_max; y++) { // loop thru the columns
// **********Modifier keys
if (modifier[x][y] != 0) { // check if modifier key exists at this location in the array (a non-zero value)
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
old_key[x][y] = LOW; // Save state of key as "pressed"
}
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
send_mod(); // function sends all mod's over usb including the one that just released
old_key[x][y] = HIGH; // Save state of key as "not pressed"
}
}
// ***********end of modifier section
//
// ***********Normal keys section
else if (normal[x][y] != 0) { // check if normal key exists at this location in the array (a non-zero value)
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // check if key is pressed and was not previously pressed
old_key[x][y] = LOW; // Save state of key as "pressed"
if ((normal[x][y] == KEY_SCROLL_LOCK) && (!Fn_pressed)) { // check for special case of Num Lock Key
load_slot(KEY_NUM_LOCK); // update first available slot with Num Lock instead of Scroll Lock
send_normals(); // send all slots over USB including the Num Lock Key that just got pressed
}
else {
load_slot(normal[x][y]); //update first available slot with normal key name
send_normals(); // send all slots over USB including the key that just got pressed
}
}
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
old_key[x][y] = HIGH; // Save state of key as "not pressed"
if ((normal[x][y] == KEY_SCROLL_LOCK) && (!Fn_pressed)) { // check for special case of Num Lock Key
clear_slot(KEY_NUM_LOCK); // clear the slot that contains Num Lock
send_normals(); // send all slots over USB including the Num Lock key
}
else {
clear_slot(normal[x][y]); //clear the slot that contains the normal key name
send_normals(); // send all slots over USB including the key that was just released
}
}
}
// **************end of normal section
//
// *************Volume key section. Note PJRC states that volume up, down, & mute should be sent with Keyboard.press function.
else if (media[x][y] != 0) { // check if any volume control key exists at this location in the array (a non-zero value)
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // check if key is pressed and was not previously pressed
old_key[x][y] = LOW; // Save state of key as "pressed"
Keyboard.press(media[x][y]); // send volume key press
}
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
old_key[x][y] = HIGH; // Save state of key as "not pressed"
Keyboard.release(media[x][y]); // send volume key release
}
}
// ***************end of volume section
}
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
}
//
// **********keyboard scan complete
//
// ****************************Trackpoint Routine*********************************
//
// poll the trackpoint for new movement data
over_flow = 0; // assume no overflow until status is received
trackpoint_error = LOW; // start with no error
trackpoint_write(0xeb); // request data
trackpoint_read(); // ignore ack
mstat = trackpoint_read(); // save into status variable
mx = trackpoint_read(); // save into x variable
my = trackpoint_read(); // save into y variable
if (((0x80 & mstat) == 0x80) || ((0x40 & mstat) == 0x40)) { // x or y overflow bits set?
over_flow = 1; // set the overflow flag
}
// change the x data from 9 bit to 8 bit 2's complement
mx = mx >> 1; // convert to 7 bits of data by dividing by 2
mx = mx & 0x7f; // don't allow sign extension
if ((0x10 & mstat) == 0x10) { // move the sign into
mx = 0x80 | mx; // the 8th bit position
}
// change the y data from 9 bit to 8 bit 2's complement and then take the 2's complement
// because y movement on ps/2 format is opposite of touchpad.move function
my = my >> 1; // convert to 7 bits of data by dividing by 2
my = my & 0x7f; // don't allow sign extension
if ((0x20 & mstat) == 0x20) { // move the sign into
my = 0x80 | my; // the 8th bit position
}
my = (~my + 0x01); // change the sign of y data by taking the 2's complement (invert and add 1)
// zero out mx and my if over_flow or trackpoint_error is set
if ((over_flow) || (trackpoint_error)) {
mx = 0x00; // data is garbage so zero it out
my = 0x00;
}
// send the x and y data back via usb if either one is non-zero
if ((mx != 0x00) || (my != 0x00)) {
Mouse.move(mx,my);
}
//
// send the trackpoint left and right button status over usb if no error
if (!trackpoint_error) {
if ((0x01 & mstat) == 0x01) { // if left button set
left_button = 1;
}
else { // clear left button
left_button = 0;
}
if ((0x02 & mstat) == 0x02) { // if right button set
right_button = 1;
}
else { // clear right button
right_button = 0;
}
if ((0x04 & mstat) == 0x04) { // if middle button set
middle_button = 1;
}
else { // clear middle button
middle_button = 0;
}
// Determine if any buttons have changed since last polling cycle
button_change = ((left_button ^ old_left_button) | (right_button ^ old_right_button) | (middle_button ^ old_middle_button));
// Don't send button status if there's no change since last time.
if (button_change) {
Mouse.set_buttons(left_button, middle_button, right_button); // send button status
}
old_left_button = left_button; // remember new button status for next polling cycle
old_right_button = right_button;
old_middle_button = middle_button;
}
// **************************************End of trackpoint routine***********************************
//
// *******keyboard LEDs
// Turn on or off the LEDs for Num Lock, Caps Lock, and Scroll Lock based on bit 0, 1, and 2 from the keyboard_leds
// variable controlled by the USB host computer
//
if (keyboard_leds & 1) { // mask off all bits but D0 and test if set
go_1(NUM_LED); // turn on the Num Lock LED
}
else {
go_0(NUM_LED); // turn off the Num Lock LED
}
//
//
if (keyboard_leds & 1<<1) { // mask off all bits but D1 and test if set
go_1(CAPS_LED); // turn on the Caps Lock LED
}
else {
go_0(CAPS_LED); // turn off the Caps Lock LED
}
//
//
if (keyboard_leds & 1<<2) { // mask off all bits but D2 and test if set
go_1(SCRL_LED); // turn on the Scroll Lock LED
}
else {
go_0(SCRL_LED); // turn off the Scroll Lock LED
}
//
// Blink LED on Teensy to show a heart beat
//
if (blink_count == 0x17) {
digitalWrite(BLINK_LED, blinky);
blinky = !blinky;
blink_count = 0;
}
else {
blink_count = blink_count + 1;
}
//
// Provide a sync pulse to measure the scan frequency
//
sync_sig = !sync_sig; // toggle the sync signal
digitalWrite(SYNC, sync_sig);
//
// ****************End of main loop
//
delay(24); // The overall keyboard/trackpoint scanning rate was measured at 30ms
}