diff --git a/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy 3p2/Lenovo_T61_KBandTP.ino b/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy 3p2/Lenovo_T61_KBandTP.ino
index 5f750d5..3f11a4f 100644
--- a/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy 3p2/Lenovo_T61_KBandTP.ino	
+++ b/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy 3p2/Lenovo_T61_KBandTP.ino	
@@ -9,19 +9,20 @@
    See the License for the specific language governing permissions and
    limitations under the License.
 */
-// This software controls a Lenovo ThinkPad T61 Laptop Keyboard and PS/2 Trackpoint using a Teensy 3.2 on 
+// This software controls a Lenovo ThinkPad T61 Laptop Keyboard and PS/2 Trackpoint using a Teensy LC on 
 // a daughterboard with a 44 pin FPC connector. The keyboard part number is 42T3177.
 // This routine uses the Teensyduino "Micro-Manager Method" to send Normal and Modifier 
 // keys over USB. Only the volume control multi-media keys are supported by this routine.
 // Description of Teensyduino keyboard functions is at www.pjrc.com/teensy/td_keyboard.html
 // The ps/2 code uses the USB PJRC Mouse functions at www.pjrc.com/teensy/td_mouse.html 
 // The ps/2 code has a watchdog timer so the code can't hang if a clock edge is missed.
-// In the Arduino IDE, select Tools, Teensy 3.2. Also under Tools, select Keyboard+Mouse+Joystick
+// In the Arduino IDE, select Tools, Teensy LC. Also under Tools, select Keyboard+Mouse+Joystick
 //
 // Revision History
 // Rev 1.0 - Nov 23, 2018 - Original Release
 // Rev 1.1 - Dec 2, 2018 - Replaced ps/2 trackpoint code from playground arduino with my own code 
-// Rev 1.2 - May 27, 2019 - Changed comment that mistakenly refered to a Teensy LC (should say 3.2)
+// Rev 1.2 - July 16, 2019 - Check if slots are full when detecting a key press
+//
 // Trackpoint signals
 #define TP_DATA 18   // ps/2 data to trackpoint
 #define TP_CLK 19    // ps/2 clock to trackpoint
@@ -461,7 +462,12 @@ void clear_slot(int key) {
   else if (slot6 == key) {
     slot6 = 0;
   }
-  slots_full = LOW;
+  if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6)  {
+    slots_full = LOW; // slots are not full
+  }
+  else {
+    slots_full = HIGH; // slots are full
+  } 
 }
 //
 // Function to load the modifier key name into the appropriate mod variable
@@ -614,7 +620,7 @@ void loop() {
 //
 // ***********Normal keys section
       else if (normal[x][y] != 0) {  // check if normal key exists at this location in the array (a non-zero value)
-        if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // check if key is pressed and was not previously pressed
+        if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key pressed and not previously pressed and slots not full
           old_key[x][y] = LOW; // Save state of key as "pressed"
           if ((normal[x][y] == KEY_SCROLL_LOCK) && (!Fn_pressed)) { // check for special case of Num Lock Key
             load_slot(KEY_NUM_LOCK); // update first available slot with Num Lock instead of Scroll Lock