From b411114548fb1d942dead252ee2458be8271951f Mon Sep 17 00:00:00 2001
From: Frank Adams <33405607+thedalles77@users.noreply.github.com>
Date: Tue, 14 Dec 2021 21:02:48 -0800
Subject: [PATCH] Update README.txt

---
 Keyboard_Scanner_Eagle_Layouts/README.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Keyboard_Scanner_Eagle_Layouts/README.txt b/Keyboard_Scanner_Eagle_Layouts/README.txt
index 828b148..115ede4 100644
--- a/Keyboard_Scanner_Eagle_Layouts/README.txt
+++ b/Keyboard_Scanner_Eagle_Layouts/README.txt
@@ -1,4 +1,4 @@
-The following Eagle files can be sent directly to OSHPark.
+The following Eagle .brd files can be sent to OSHPark. The Zipped gerber files can be sent directly to PJRC for fabrication
 
 Keyboard_Scanner.brd EagleCad circuit board file for Teensy LC or 3.2. Original layout shown in the video. Use the LT2 board instead.
 
@@ -26,7 +26,9 @@ FPC_18pin1mm.brd  EagleCad file for 18 pin 1mm, 0.8mm, or 0.5mm breakout board
 
 Teensy3p2Cutout.brd EagleCad file has a cutout in the board so the Teensy 3.2 will sit flush instead of on top of the board. 
 
+Teensy3p2CutoutFlip.brd EagleCad file is the same as above file but it has the cutout on the right side instead of the left side.
+
 iBookG3Cutout.brd EagleCad file is the same as above but with a 40 pin connector specifically for the iBookG3 keyboard.
 
-The Zipped gerber files for the above boards can be sent directly to PJRC for fabrication
+