Add files via upload
This commit is contained in:
Frank Adams
GitHub
parent
b1c8921fe1
commit
c3b832edca
1 changed files with 574 additions and 0 deletions
574
Example_Keyboards/Fujitsu_Lifebook/Fujitsu_KB_Ergotrac.ino
Normal file
574
Example_Keyboards/Fujitsu_Lifebook/Fujitsu_KB_Ergotrac.ino
Normal file
|
|
@ -0,0 +1,574 @@
|
||||||
|
/* Copyright 2021 Frank Adams
|
||||||
|
Licensed under the Apache License, Version 2.0 (the "License");
|
||||||
|
you may not use this file except in compliance with the License.
|
||||||
|
You may obtain a copy of the License at
|
||||||
|
http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
Unless required by applicable law or agreed to in writing, software
|
||||||
|
distributed under the License is distributed on an "AS IS" BASIS,
|
||||||
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
See the License for the specific language governing permissions and
|
||||||
|
limitations under the License.
|
||||||
|
*/
|
||||||
|
// This software creates a composite USB keyboard from a Fujitsu Lifebook keyboard and Ergotrac pointing device.
|
||||||
|
//
|
||||||
|
// Revision History
|
||||||
|
// Initial Release Nov 10, 2021
|
||||||
|
//
|
||||||
|
#define MODIFIERKEY_FN 0x8f // give Fn key a fake HID code
|
||||||
|
// LED I/O connections
|
||||||
|
#define CAPS_LED 4
|
||||||
|
#define NUM_LED 5
|
||||||
|
//
|
||||||
|
// X/Y outputs from ErgoTrac feed Teensy ADC channels
|
||||||
|
#define ErgoTrac_X A10
|
||||||
|
#define ErgoTrac_Y A11
|
||||||
|
// Reference signal from Teensy into ErgoTrac
|
||||||
|
#define ErgoTrac_Ref 8
|
||||||
|
// left and right mouse buttons
|
||||||
|
#define TP_LEFT 7
|
||||||
|
#define TP_RIGHT 6
|
||||||
|
//
|
||||||
|
const byte rows_max = 16; // sets the number of rows in the matrix
|
||||||
|
const byte cols_max = 8; // sets the number of columns in the matrix
|
||||||
|
//
|
||||||
|
// Load the normal key matrix with the Teensyduino key names
|
||||||
|
// described at www.pjrc.com/teensy/td_keyboard.html
|
||||||
|
// A zero indicates no normal key at that location.
|
||||||
|
int normal[rows_max][cols_max] = {
|
||||||
|
{KEY_PAGE_DOWN,KEY_PAGE_UP,KEY_PRINTSCREEN,KEY_NUM_LOCK,KEY_PAUSE,KEY_INSERT,KEY_HOME,KEY_BACKSPACE},
|
||||||
|
{KEY_BACKSLASH,KEY_ENTER,KEY_F11,KEY_F12,KEY_DELETE,KEY_END,0,KEY_RIGHT},
|
||||||
|
{KEY_LEFT_BRACE,KEY_EQUAL,KEY_F10,KEY_0,0,KEY_MINUS,KEY_RIGHT_BRACE,KEY_DOWN},
|
||||||
|
{KEY_QUOTE,0,KEY_F9,KEY_9,KEY_O,KEY_P,KEY_SEMICOLON,KEY_UP},
|
||||||
|
{KEY_MENU,KEY_SLASH,KEY_8,KEY_I,KEY_K,KEY_L,KEY_PERIOD,KEY_LEFT},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,KEY_7,KEY_U,KEY_J,KEY_M,KEY_COMMA,0},
|
||||||
|
{KEY_B,KEY_C,KEY_F8,KEY_6,KEY_T,KEY_Y,KEY_H,KEY_SPACE},
|
||||||
|
{KEY_V,KEY_N,KEY_F7,KEY_5,KEY_R,KEY_F,KEY_G,0},
|
||||||
|
{KEY_X,KEY_Z,KEY_F6,KEY_4,KEY_E,KEY_1,KEY_D,0},
|
||||||
|
{KEY_Q,KEY_W,KEY_F5,KEY_3,KEY_2,KEY_S,KEY_A,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{KEY_CAPS_LOCK,KEY_TAB,KEY_F4,KEY_F3,KEY_F2,KEY_ESC,KEY_F1,KEY_TILDE}
|
||||||
|
};
|
||||||
|
// Load the numlock key matrix with key names at the correct row-column location.
|
||||||
|
// This matrix is the same as the normal matrix except for the number pad keys
|
||||||
|
// A zero indicates no numlock key at that location.
|
||||||
|
int numlock[rows_max][cols_max] = {
|
||||||
|
{KEY_PAGE_DOWN,KEY_PAGE_UP,KEY_PRINTSCREEN,KEY_NUM_LOCK,KEY_PAUSE,KEY_INSERT,KEY_HOME,KEY_BACKSPACE},
|
||||||
|
{KEY_BACKSLASH,KEY_ENTER,KEY_F11,KEY_F12,KEY_DELETE,KEY_END,0,KEY_RIGHT},
|
||||||
|
{KEYPAD_ENTER,KEY_EQUAL,KEY_F10,KEY_0,0,KEYPAD_MINUS,KEY_RIGHT_BRACE,KEY_DOWN},
|
||||||
|
{KEYPAD_ASTERIX,0,KEY_F9,KEYPAD_9,KEYPAD_6,KEY_P,KEYPAD_PLUS,KEY_UP},
|
||||||
|
{KEY_MENU,KEYPAD_SLASH,KEYPAD_8,KEYPAD_5,KEYPAD_2,KEYPAD_3,KEYPAD_PERIOD,KEY_LEFT},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,KEYPAD_7,KEYPAD_4,KEYPAD_1,KEYPAD_0,KEY_COMMA,0},
|
||||||
|
{KEY_B,KEY_C,KEY_F8,KEY_6,KEY_T,KEY_Y,KEY_H,KEY_SPACE},
|
||||||
|
{KEY_V,KEY_N,KEY_F7,KEY_5,KEY_R,KEY_F,KEY_G,0},
|
||||||
|
{KEY_X,KEY_Z,KEY_F6,KEY_4,KEY_E,KEY_1,KEY_D,0},
|
||||||
|
{KEY_Q,KEY_W,KEY_F5,KEY_3,KEY_2,KEY_S,KEY_A,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{KEY_CAPS_LOCK,KEY_TAB,KEY_F4,KEY_F3,KEY_F2,KEY_ESC,KEY_F1,KEY_TILDE}
|
||||||
|
};
|
||||||
|
// Load the modifier key matrix with key names at the correct row-column location.
|
||||||
|
// A zero indicates no modifier key at that location.
|
||||||
|
int modifier[rows_max][cols_max] = {
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,MODIFIERKEY_GUI,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,MODIFIERKEY_LEFT_ALT},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,MODIFIERKEY_GUI,0},
|
||||||
|
{0,0,0,MODIFIERKEY_RIGHT_SHIFT,MODIFIERKEY_LEFT_SHIFT,0,0,0},
|
||||||
|
{MODIFIERKEY_LEFT_CTRL,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,MODIFIERKEY_FN},
|
||||||
|
{0,0,0,0,0,0,0,0}
|
||||||
|
};
|
||||||
|
// Load the media key matrix with Fn key names at the correct row-column location.
|
||||||
|
// A zero indicates no media key at that location.
|
||||||
|
int media[rows_max][cols_max] = {
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,0,0,0,0,0},
|
||||||
|
{0,0,0,KEY_MEDIA_VOLUME_INC,KEY_MEDIA_VOLUME_DEC,0,KEY_MEDIA_MUTE,0}
|
||||||
|
};
|
||||||
|
// Initialize the old_key matrix with one's.
|
||||||
|
// 1 = key not pressed, 0 = key is pressed
|
||||||
|
boolean old_key[rows_max][cols_max] = {
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1},
|
||||||
|
{1,1,1,1,1,1,1,1}
|
||||||
|
};
|
||||||
|
//
|
||||||
|
// Assign the Teensy I/O row numbers
|
||||||
|
int Row_IO[rows_max] = {33,9,26,10,27,11,28,12,32,31,30,29,16,15,14,13};
|
||||||
|
//
|
||||||
|
// Assign the column I/O numbers
|
||||||
|
int Col_IO[cols_max] = {23,0,22,1,21,2,20,3};
|
||||||
|
//
|
||||||
|
// Declare keyboard variables that will be used by functions
|
||||||
|
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
|
||||||
|
//
|
||||||
|
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
|
||||||
|
int slot1 = 0; //value of 0 means the slot is empty and can be used.
|
||||||
|
int slot2 = 0;
|
||||||
|
int slot3 = 0;
|
||||||
|
int slot4 = 0;
|
||||||
|
int slot5 = 0;
|
||||||
|
int slot6 = 0;
|
||||||
|
//
|
||||||
|
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
|
||||||
|
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
|
||||||
|
int mod_ctrl_l = 0;
|
||||||
|
int mod_ctrl_r = 0;
|
||||||
|
int mod_alt_l = 0;
|
||||||
|
int mod_alt_r = 0;
|
||||||
|
int mod_gui = 0;
|
||||||
|
//
|
||||||
|
// declare and initialize ErgoTrac variables
|
||||||
|
int x_read; // stores the reading from the X ADC
|
||||||
|
int y_read; // same for the Y ADC
|
||||||
|
char mx; // signed byte used by the Mouse.move function for x value. Positive value moves to the right
|
||||||
|
char my; // positive y value moves down
|
||||||
|
int x_delta; // signed 16 bit value gives x movement amount
|
||||||
|
int y_delta; // y version.
|
||||||
|
int x_center; //resting position of x sensor
|
||||||
|
int y_center; //resting position of y sensor
|
||||||
|
int noise_zone = 150; // dead zone around the center. Too small causes cursor to drift when at rest. Too large requires a lot of pressure to move.
|
||||||
|
char slowdown_left = 75; // factor to slow the curser movement down.
|
||||||
|
char slowdown_right = 60; // The left, right, up, and down default values are different
|
||||||
|
char slowdown_up = 70; // because testing shows one direction is naturaly faster than the other
|
||||||
|
char slowdown_down = 75; //
|
||||||
|
boolean left_button = 0; // on/off variable for left button, 1 = pushed
|
||||||
|
boolean right_button = 0; // on/off variable for right button, 1 = pushed
|
||||||
|
boolean old_left_button = 0; // on/off variable for left button from the previous cycle
|
||||||
|
boolean old_right_button = 0; // on/off variable for right button from the previous cycle
|
||||||
|
boolean button_change = 0; // Shows when the left or right buttons have changed, 1 = change
|
||||||
|
//
|
||||||
|
// Function to load the key name into the first available slot
|
||||||
|
void load_slot(int key) {
|
||||||
|
if (!slot1) {
|
||||||
|
slot1 = key;
|
||||||
|
}
|
||||||
|
else if (!slot2) {
|
||||||
|
slot2 = key;
|
||||||
|
}
|
||||||
|
else if (!slot3) {
|
||||||
|
slot3 = key;
|
||||||
|
}
|
||||||
|
else if (!slot4) {
|
||||||
|
slot4 = key;
|
||||||
|
}
|
||||||
|
else if (!slot5) {
|
||||||
|
slot5 = key;
|
||||||
|
}
|
||||||
|
else if (!slot6) {
|
||||||
|
slot6 = key;
|
||||||
|
}
|
||||||
|
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||||
|
slots_full = LOW; // slots are not full
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
slots_full = HIGH; // slots are full
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to clear the slot that contains the key name
|
||||||
|
void clear_slot(int key) {
|
||||||
|
if (slot1 == key) {
|
||||||
|
slot1 = 0;
|
||||||
|
}
|
||||||
|
else if (slot2 == key) {
|
||||||
|
slot2 = 0;
|
||||||
|
}
|
||||||
|
else if (slot3 == key) {
|
||||||
|
slot3 = 0;
|
||||||
|
}
|
||||||
|
else if (slot4 == key) {
|
||||||
|
slot4 = 0;
|
||||||
|
}
|
||||||
|
else if (slot5 == key) {
|
||||||
|
slot5 = 0;
|
||||||
|
}
|
||||||
|
else if (slot6 == key) {
|
||||||
|
slot6 = 0;
|
||||||
|
}
|
||||||
|
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||||
|
slots_full = LOW; // slots are not full
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
slots_full = HIGH; // slots are full
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to load the modifier key name into the appropriate mod variable
|
||||||
|
void load_mod(int m_key) {
|
||||||
|
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||||
|
mod_shift_l = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||||
|
mod_shift_r = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||||
|
mod_ctrl_l = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||||
|
mod_ctrl_r = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||||
|
mod_alt_l = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||||
|
mod_alt_r = m_key;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_GUI) {
|
||||||
|
mod_gui = m_key;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to load 0 into the appropriate mod variable
|
||||||
|
void clear_mod(int m_key) {
|
||||||
|
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||||
|
mod_shift_l = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||||
|
mod_shift_r = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||||
|
mod_ctrl_l = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||||
|
mod_ctrl_r = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||||
|
mod_alt_l = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||||
|
mod_alt_r = 0;
|
||||||
|
}
|
||||||
|
else if (m_key == MODIFIERKEY_GUI) {
|
||||||
|
mod_gui = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to send the modifier keys over usb
|
||||||
|
void send_mod() {
|
||||||
|
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
|
||||||
|
Keyboard.send_now();
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to send the normal keys in the 6 slots over usb
|
||||||
|
void send_normals() {
|
||||||
|
Keyboard.set_key1(slot1);
|
||||||
|
Keyboard.set_key2(slot2);
|
||||||
|
Keyboard.set_key3(slot3);
|
||||||
|
Keyboard.set_key4(slot4);
|
||||||
|
Keyboard.set_key5(slot5);
|
||||||
|
Keyboard.set_key6(slot6);
|
||||||
|
Keyboard.send_now();
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to set a pin to high impedance (acts like open drain output)
|
||||||
|
void go_z(int pin)
|
||||||
|
{
|
||||||
|
pinMode(pin, INPUT);
|
||||||
|
digitalWrite(pin, HIGH);
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to set a pin as an input with a pullup
|
||||||
|
void go_pu(int pin)
|
||||||
|
{
|
||||||
|
pinMode(pin, INPUT_PULLUP);
|
||||||
|
digitalWrite(pin, HIGH);
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to send a pin to a logic low
|
||||||
|
void go_0(int pin)
|
||||||
|
{
|
||||||
|
pinMode(pin, OUTPUT);
|
||||||
|
digitalWrite(pin, LOW);
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to send a pin to a logic high
|
||||||
|
void go_1(int pin)
|
||||||
|
{
|
||||||
|
pinMode(pin, OUTPUT);
|
||||||
|
digitalWrite(pin, HIGH);
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Function to re-capture the at-rest X & Y ADC values
|
||||||
|
void recenter(void)
|
||||||
|
{
|
||||||
|
digitalWrite(ErgoTrac_Ref, LOW); // resting state of reference
|
||||||
|
delay(25); // wait before sending pulse high
|
||||||
|
digitalWrite(ErgoTrac_Ref, HIGH); // Send pulse high
|
||||||
|
delayMicroseconds(400); // wait before reading ADC to allow for rise time
|
||||||
|
x_center = analogRead(ErgoTrac_X); // store the center (no movement) value for x
|
||||||
|
y_center = analogRead(ErgoTrac_Y); // same for y
|
||||||
|
delayMicroseconds(50); // wait before releasing pulse
|
||||||
|
digitalWrite(ErgoTrac_Ref, LOW); // Send pulse back to resting state
|
||||||
|
}
|
||||||
|
//
|
||||||
|
//----------------------------------Setup-------------------------------------------
|
||||||
|
void setup() {
|
||||||
|
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
|
||||||
|
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
|
||||||
|
}
|
||||||
|
//
|
||||||
|
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
|
||||||
|
go_z(Row_IO[b]); // set each row pin as a floating output
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Turn off Num lock if it's on at power up
|
||||||
|
extern volatile uint8_t keyboard_leds; // 8 bits sent from Host to Teensy that give keyboard LED status.
|
||||||
|
delay(1000); // wait to let the Teensy receive keyboard_leds byte from host
|
||||||
|
if (keyboard_leds & 1) { // test if bit d0 is set, this is the num lock bit
|
||||||
|
Keyboard.press(KEY_NUM_LOCK); // Push the num lock key to de-select it
|
||||||
|
delay(5); // delay 5 milliseconds before releasing the key
|
||||||
|
Keyboard.release(KEY_NUM_LOCK); // Release the num lock key
|
||||||
|
}
|
||||||
|
go_pu(TP_RIGHT); // set right mouse button as input with a pullup
|
||||||
|
go_pu(TP_LEFT); // set left mouse button as input with a pullup
|
||||||
|
delay(1000); // wait to let things settle out
|
||||||
|
analogReadRes(13); // set ADC resolution to 13 bits (16 bit ADC but low 3 bits are random noise)
|
||||||
|
analogReadAveraging(8); // ADC will take the average of multiple reads to filter noise.
|
||||||
|
pinMode(ErgoTrac_Ref, OUTPUT); // define Teensy I/O that drives the refernce pulses to the ErgoTrac
|
||||||
|
recenter(); // capture the at-rest X and Y position
|
||||||
|
delay(25); // wait before entering main loop
|
||||||
|
}
|
||||||
|
boolean Fn_pressed = HIGH; // Active low, shows when the Fn key is pressed
|
||||||
|
//
|
||||||
|
//---------------------------------Main Loop---------------------------------------------
|
||||||
|
//
|
||||||
|
void loop() {
|
||||||
|
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
|
||||||
|
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
|
||||||
|
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
|
||||||
|
// The keyboard keys will read as logic low if they are pressed (negative logic).
|
||||||
|
// The old_key matrix also uses negative logic (low=pressed).
|
||||||
|
//
|
||||||
|
for (int x = 0; x < rows_max; x++) { // loop thru the rows
|
||||||
|
go_0(Row_IO[x]); // Activate Row (send it low)
|
||||||
|
delayMicroseconds(10); // give the row time to go low and settle out
|
||||||
|
for (int y = 0; y < cols_max; y++) { // loop thru the columns
|
||||||
|
// **********Modifier keys including the Fn special case
|
||||||
|
if (modifier[x][y] != 0) { // check if modifier key exists at this location in the array (a non-zero value)
|
||||||
|
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
|
||||||
|
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||||
|
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
|
||||||
|
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
|
||||||
|
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||||
|
}
|
||||||
|
else { // Fn is pressed
|
||||||
|
Fn_pressed = LOW; // Fn status variable is active low
|
||||||
|
old_key[x][y] = LOW; // old_key state is "pressed" (active low)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
|
||||||
|
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||||
|
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
|
||||||
|
send_mod(); // function sends all mod's over usb including the one that just released
|
||||||
|
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||||
|
}
|
||||||
|
else { // Fn is released
|
||||||
|
Fn_pressed = HIGH; // Fn is no longer active
|
||||||
|
old_key[x][y] = HIGH; // old_key state is "not pressed"
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// ***********end of modifier section
|
||||||
|
//
|
||||||
|
// ***********Normal keys, num lock, and media keys in this section
|
||||||
|
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
|
||||||
|
if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key pressed and not previously pressed and slots not full
|
||||||
|
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||||
|
if (Fn_pressed) { // Fn is not pressed and normal key needs to be sent
|
||||||
|
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||||
|
load_slot(numlock[x][y]); //update first available slot with key name from numlock matrix
|
||||||
|
send_normals(); // send all slots over USB including the key that just got pressed
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
load_slot(normal[x][y]); //update first available slot with key name from normal matrix
|
||||||
|
send_normals(); // send all slots over USB including the key that just got pressed
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else if (media[x][y] != 0) { // Fn is pressed so send media if a key exists in the matrix
|
||||||
|
Keyboard.press(media[x][y]); // media key is sent using keyboard press function per PJRC
|
||||||
|
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||||
|
Keyboard.release(media[x][y]); // send media key release
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F11) { // Fn is active and F is pressed - recapture TP center
|
||||||
|
recenter(); // recapture the at-rest X and Y position
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F10) { // Fn is active and F is pressed - increase noise zone value by 5
|
||||||
|
noise_zone = noise_zone + 5;
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F9) { // Fn is active and F is pressed - decrease noise zone value by 5
|
||||||
|
noise_zone = noise_zone - 5;
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F8) { // Fn is active and F is pressed
|
||||||
|
slowdown_left = slowdown_left - 5; // decrease all slowdown values by 5
|
||||||
|
slowdown_right = slowdown_right - 5;
|
||||||
|
slowdown_up = slowdown_up - 5;
|
||||||
|
slowdown_down = slowdown_down - 5;
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F7) { // Fn is active and F is pressed
|
||||||
|
slowdown_left = slowdown_left + 5; // increase all slowdown values by 5
|
||||||
|
slowdown_right = slowdown_right + 5;
|
||||||
|
slowdown_up = slowdown_up + 5;
|
||||||
|
slowdown_down = slowdown_down + 5;
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F6) { // Fn is active and F is pressed
|
||||||
|
noise_zone = 150; // Set noise zone and slowdowns to default values
|
||||||
|
slowdown_left = 75;
|
||||||
|
slowdown_right = 60;
|
||||||
|
slowdown_up = 70;
|
||||||
|
slowdown_down = 75;
|
||||||
|
}
|
||||||
|
else if (normal[x][y] == KEY_F5) { // Fn is active and F is pressed
|
||||||
|
if (noise_zone >= 1000) {
|
||||||
|
noise_zone = 150;
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
noise_zone = 5000;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
|
||||||
|
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||||
|
if (Fn_pressed) { // Fn is not pressed
|
||||||
|
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||||
|
clear_slot(numlock[x][y]); //clear slot with key name from numlock matrix
|
||||||
|
send_normals(); // send all slots over USB including the key that just got released
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
clear_slot(normal[x][y]); //clear slot with key name from normal matrix
|
||||||
|
send_normals(); // send all slots over USB including the key that just got released
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// **************end of normal, num lock, and media key section
|
||||||
|
//
|
||||||
|
}
|
||||||
|
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// **********Keyboard scan complete
|
||||||
|
//
|
||||||
|
// **********Ergo Trac section
|
||||||
|
digitalWrite(ErgoTrac_Ref, HIGH); // send calibration reference pulse
|
||||||
|
mx = 0; // for each loop, start with zero and update only if movement detected
|
||||||
|
my = 0; // same for y
|
||||||
|
// Read the ADC's
|
||||||
|
x_read = analogRead(ErgoTrac_X); // read the ADC tied to the X sensor
|
||||||
|
y_read = analogRead(ErgoTrac_Y); // read the ADC tied to the Y sensor
|
||||||
|
// Check if X or Y movement is beyond the dead zone
|
||||||
|
if ((x_read > (x_center + noise_zone)) || (x_read < (x_center - noise_zone)) || (y_read > (y_center + noise_zone)) || (y_read < (y_center - noise_zone))) {
|
||||||
|
// Only do the following if at least one reading is beyond the dead zone.
|
||||||
|
// Figure out if the X value is to the right or the left of the center resting value
|
||||||
|
if (x_read > x_center) { // is X ADC to the right of the resting position?
|
||||||
|
x_delta = (x_read - x_center) / slowdown_right; // find out how far beyond center. Divide it to slow it down.
|
||||||
|
mx = byte(x_delta); // convert signed 16 bit to signed 8 bit
|
||||||
|
}
|
||||||
|
else { // X ADC is equal or to the left of the resting position
|
||||||
|
x_delta = ((x_center - x_read) / slowdown_left) * -1; // Answer should be negative so multiply by -1
|
||||||
|
mx = byte(x_delta); // convert signed 16 bit to signed 8 bit
|
||||||
|
}
|
||||||
|
// Figure out if the Y value is above or below the center resting value
|
||||||
|
if (y_read > y_center) { // is Y ADC above the resting position?
|
||||||
|
y_delta = ((y_read - y_center) / slowdown_down) * -1; // up movement is negative for Mouse.move function
|
||||||
|
my = byte(y_delta); // convert signed 16 bit to signed 8 bit
|
||||||
|
}
|
||||||
|
else { // Y ADC is equal or below the resting position
|
||||||
|
y_delta = (y_center - y_read) / slowdown_up;
|
||||||
|
my = byte(y_delta); // convert signed 16 bit to signed 8 bit
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// send the x and y data over usb if either one is not at center position
|
||||||
|
if ((mx != 0x00) || (my != 0x00)) {
|
||||||
|
Mouse.move(mx,my);
|
||||||
|
}
|
||||||
|
digitalWrite(ErgoTrac_Ref, LOW); // release calibration reference
|
||||||
|
//
|
||||||
|
// Read the right button
|
||||||
|
//
|
||||||
|
if (!digitalRead(TP_RIGHT)) { // check if right button is low (low = pushed)
|
||||||
|
right_button = 1; // set the right button
|
||||||
|
}
|
||||||
|
else { // clear right button
|
||||||
|
right_button = 0; // clear the right button
|
||||||
|
}
|
||||||
|
// Read the left button
|
||||||
|
if (!digitalRead(TP_LEFT)) { // check if left button is low (low = pushed)
|
||||||
|
left_button = 1; // set the left button
|
||||||
|
}
|
||||||
|
else { // clear left button
|
||||||
|
left_button = 0; // clear the left button
|
||||||
|
}
|
||||||
|
//
|
||||||
|
// Determine if the buttons have changed (using XOR) since the last cycle
|
||||||
|
button_change = ((left_button ^ old_left_button) | (right_button ^ old_right_button));
|
||||||
|
// Don't send button status if there's no change since last time
|
||||||
|
if (button_change){
|
||||||
|
Mouse.set_buttons(left_button,0, right_button); // send button status over USB
|
||||||
|
}
|
||||||
|
old_left_button = left_button; // remember button status for the next cycle
|
||||||
|
old_right_button = right_button;
|
||||||
|
//
|
||||||
|
// End of Ergo Trac section
|
||||||
|
//
|
||||||
|
// Control the keyboard LEDs
|
||||||
|
//
|
||||||
|
if (keyboard_leds & 1<<1) {
|
||||||
|
// if (keyboard_leds & 1<<1) { // mask off all bits but D1 and test if set
|
||||||
|
go_1(CAPS_LED); // turn on the LED
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
go_0(CAPS_LED); // turn off the LED
|
||||||
|
}
|
||||||
|
//
|
||||||
|
if (keyboard_leds & 1) { // mask off all bits but D0 and test if set
|
||||||
|
go_1(NUM_LED); // turn on the Num Lock LED
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
go_0(NUM_LED); // turn off the Num Lock LED
|
||||||
|
}
|
||||||
|
//
|
||||||
|
//******************Delay before the next loop
|
||||||
|
delay(25); // The overall keyboard scanning rate is about 30ms
|
||||||
|
}
|
||||||
Loading…
Reference in a new issue