medvedych/USB_Laptop_Keyboard_Controller
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Add files via upload

Browse source
This commit is contained in:
Frank Adams 2021-11-15 20:00:09 -08:00 committed by GitHub
parent c3b832edca
commit c461829777
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 16 additions and 16 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

32
Example_Keyboards/Fujitsu_Lifebook/Fujitsu_KB_Ergotrac.ino
View file

@ -12,7 +12,7 @@
// This software creates a composite USB keyboard from a Fujitsu Lifebook keyboard and Ergotrac pointing device.
//
// Revision History
// Initial Release Nov 10, 2021
// Initial Release Nov 15, 2021
//
#define MODIFIERKEY_FN 0x8f // give Fn key a fake HID code
// LED I/O connections
@ -168,7 +168,7 @@ int x_delta; // signed 16 bit value gives x movement amount
int y_delta; // y version.
int x_center; //resting position of x sensor
int y_center; //resting position of y sensor
int noise_zone = 150; // dead zone around the center. Too small causes cursor to drift when at rest. Too large requires a lot of pressure to move.
int noise_zone = 50; // dead zone around the center. Too small causes cursor to drift when at rest. Too large requires a lot of pressure to move.
char slowdown_left = 75; // factor to slow the curser movement down.
char slowdown_right = 60; // The left, right, up, and down default values are different
char slowdown_up = 70; // because testing shows one direction is naturaly faster than the other
@ -337,8 +337,8 @@ void recenter(void)
delay(25); // wait before sending pulse high
digitalWrite(ErgoTrac_Ref, HIGH); // Send pulse high
delayMicroseconds(400); // wait before reading ADC to allow for rise time
x_center = analogRead(ErgoTrac_X); // store the center (no movement) value for x
y_center = analogRead(ErgoTrac_Y); // same for y
x_center = analogRead(ErgoTrac_X) - 100; // store the center for x with an offset (this ergo trac wants to drift left)
y_center = analogRead(ErgoTrac_Y); // store the center (no movement) value for y
delayMicroseconds(50); // wait before releasing pulse
digitalWrite(ErgoTrac_Ref, LOW); // Send pulse back to resting state
}
@ -431,40 +431,40 @@ void loop() {
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
Keyboard.release(media[x][y]); // send media key release
}
else if (normal[x][y] == KEY_F11) { // Fn is active and F is pressed - recapture TP center
else if (normal[x][y] == KEY_F11) { // Fn is active and F11 is pressed - recapture TP center
recenter(); // recapture the at-rest X and Y position
}
else if (normal[x][y] == KEY_F10) { // Fn is active and F is pressed - increase noise zone value by 5
else if (normal[x][y] == KEY_F10) { // Fn is active and F10 is pressed - increase noise zone value by 5
noise_zone = noise_zone + 5;
}
else if (normal[x][y] == KEY_F9) { // Fn is active and F is pressed - decrease noise zone value by 5
else if (normal[x][y] == KEY_F9) { // Fn is active and F9 is pressed - decrease noise zone value by 5
noise_zone = noise_zone - 5;
}
else if (normal[x][y] == KEY_F8) { // Fn is active and F is pressed
else if (normal[x][y] == KEY_F8) { // Fn is active and F8 is pressed
slowdown_left = slowdown_left - 5; // decrease all slowdown values by 5
slowdown_right = slowdown_right - 5;
slowdown_up = slowdown_up - 5;
slowdown_down = slowdown_down - 5;
}
else if (normal[x][y] == KEY_F7) { // Fn is active and F is pressed
else if (normal[x][y] == KEY_F7) { // Fn is active and F7 is pressed
slowdown_left = slowdown_left + 5; // increase all slowdown values by 5
slowdown_right = slowdown_right + 5;
slowdown_up = slowdown_up + 5;
slowdown_down = slowdown_down + 5;
}
else if (normal[x][y] == KEY_F6) { // Fn is active and F is pressed
noise_zone = 150; // Set noise zone and slowdowns to default values
slowdown_left = 75;
else if (normal[x][y] == KEY_F6) { // Fn is active and F6 is pressed
noise_zone = 50; // Set noise zone and slowdowns to default values
slowdown_left = 75; // movement left needs more slowdown for some reason
slowdown_right = 60;
slowdown_up = 70;
slowdown_down = 75;
}
else if (normal[x][y] == KEY_F5) { // Fn is active and F is pressed
if (noise_zone >= 1000) {
noise_zone = 150;
else if (normal[x][y] == KEY_F5) { // Fn is active and F5 is pressed
if (noise_zone >= 1000) { // toggle back to normal or huge (off) value
noise_zone = 50; // back to start up value
}
else {
noise_zone = 5000;
noise_zone = 5000; // huge noise zone won't allow cursor movement
}
}
}