diff --git a/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy LC/Lenovo_T61_Keyboard_LC.ino b/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy LC/Lenovo_T61_Keyboard_LC.ino
new file mode 100644
index 0000000..ac4ff65
--- /dev/null
+++ b/Example_Keyboards/Lenovo_ThinkPad_T61/Teensy LC/Lenovo_T61_Keyboard_LC.ino	
@@ -0,0 +1,408 @@
+/* Copyright 2022 Frank Adams
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+*/
+// This software controls a Lenovo ThinkPad T61 Laptop Keyboard using a Teensy LC on 
+// a daughterboard with a 44 pin FPC connector. The keyboard part number is 42T3177.
+// This routine uses the Teensyduino "Micro-Manager Method" to send Normal and Modifier 
+// keys over USB. Only the volume control multi-media keys are supported by this routine.
+// Description of Teensyduino keyboard functions is at www.pjrc.com/teensy/td_keyboard.html
+//
+// Revision History
+// Rev 1.0 - April 6, 2022 - Original Release
+//
+#define MODIFIERKEY_FN 0x8f   // give Fn key a HID code
+// Keyboard LEDs
+#define CAPS_LED 13   // includes 715 ohm resistor for 2ma LED 
+// Set the keyboard row & column size
+const byte rows_max = 16; // sets the number of rows in the matrix
+const byte cols_max = 8; // sets the number of columns in the matrix
+//
+// Load the normal key matrix with the Teensyduino key names described at www.pjrc.com/teensy/td_keyboard.html
+// A zero indicates no normal key at that location.
+//
+int normal[rows_max][cols_max] = {
+  {KEY_TILDE,KEY_1,KEY_Q,KEY_TAB,KEY_A,KEY_ESC,KEY_Z,0},
+  {KEY_F1,KEY_2,KEY_W,KEY_CAPS_LOCK,KEY_S,0,KEY_X,0},
+  {KEY_F2,KEY_3,KEY_E,KEY_F3,KEY_D,KEY_F4,KEY_C,0},
+  {KEY_5,KEY_4,KEY_R,KEY_T,KEY_F,KEY_G,KEY_V,KEY_B},
+  {KEY_6,KEY_7,KEY_U,KEY_Y,KEY_J,KEY_H,KEY_M,KEY_N},
+  {KEY_EQUAL,KEY_8,KEY_I,KEY_RIGHT_BRACE,KEY_K,KEY_F6,KEY_COMMA,0},
+  {KEY_F8,KEY_9,KEY_O,KEY_F7,KEY_L,0,KEY_PERIOD,0},
+  {KEY_MINUS,KEY_0,KEY_P,KEY_LEFT_BRACE,KEY_SEMICOLON,KEY_QUOTE,0,KEY_SLASH},
+  {KEY_F9,KEY_F10,0,KEY_BACKSPACE,KEY_BACKSLASH,KEY_F5,KEY_ENTER,KEY_SPACE},
+  {KEY_INSERT,KEY_F12,0,0,0,0,0,KEY_RIGHT},  
+  {KEY_DELETE,KEY_F11,0,0,0,0,0,KEY_DOWN},
+  {KEY_PAGE_UP,KEY_PAGE_DOWN,0,0,KEY_MENU,0,0,0},
+  {KEY_HOME,KEY_END,0,0,0,KEY_UP,KEY_PAUSE,KEY_LEFT},
+  {0,KEY_PRINTSCREEN,KEY_SCROLL_LOCK,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0}
+};
+// Load the modifier key matrix with key names at the correct row-column location. 
+// A zero indicates no modifier key at that location.
+int modifier[rows_max][cols_max] = {
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},   
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,MODIFIERKEY_FN,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,MODIFIERKEY_GUI,0,0,0,0,0},    
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,MODIFIERKEY_LEFT_ALT,0,MODIFIERKEY_RIGHT_ALT},
+  {0,0,0,MODIFIERKEY_LEFT_SHIFT,0,0,MODIFIERKEY_RIGHT_SHIFT,0},
+  {MODIFIERKEY_LEFT_CTRL,0,0,0,0,0,MODIFIERKEY_RIGHT_CTRL,0}
+};
+// Load the media key matrix with key names at the correct row-column location. 
+// A zero indicates no media key at that location.
+int media[rows_max][cols_max] = {
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},   
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,KEY_MEDIA_VOLUME_INC,KEY_MEDIA_VOLUME_DEC,KEY_MEDIA_MUTE,0,0,0},
+  {0,0,0,0,0,0,0,0},   
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0},
+  {0,0,0,0,0,0,0,0}
+};
+// Initialize the old_key matrix with one's. 
+// 1 = key not pressed, 0 = key is pressed
+boolean old_key[rows_max][cols_max] = {
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1},
+  {1,1,1,1,1,1,1,1}
+};
+//
+// Define the Teensy LC I/O numbers 
+//
+// Row FPC pin # 22,18,14,10,02,04,08,12,06,20,16,24,28,32,26,30
+// Teensy I/O  # 15,20,19,18,16,08,07,06,17,09,05,10,11,12,14,26
+int Row_IO[rows_max] = {15,20,19,18,16,8,7,6,17,9,5,10,11,12,14,26}; // Teensy LC I/O numbers for rows
+//
+// Column FPC pin # 05,13,09,07,11,03,15,17
+// Teensy I/O     # 21,23,22,25,24,04,03,02
+int Col_IO[cols_max] = {21,23,22,25,24,4,3,2};  // Teensy LC I/O numbers for columns
+//
+// Declare variables that will be used by functions
+boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
+// slot 1 thru slot 6 hold the normal key values to be sent over USB. 
+int slot1 = 0; //value of 0 means the slot is empty and can be used.  
+int slot2 = 0; 
+int slot3 = 0; 
+int slot4 = 0; 
+int slot5 = 0; 
+int slot6 = 0;
+//
+int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
+int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ... 
+int mod_ctrl_l = 0;   
+int mod_ctrl_r = 0;
+int mod_alt_l = 0;
+int mod_alt_r = 0;
+int mod_gui = 0;
+//
+// **************Functions for keyboard**************************
+//
+// Function to set a pin to high impedance (acts like open drain output)
+void go_z(int pin)
+{
+  pinMode(pin, INPUT);
+  digitalWrite(pin, HIGH);
+}
+//
+// Function to set a pin as an input with a pullup
+void go_pu(int pin)
+{
+  pinMode(pin, INPUT_PULLUP);
+  digitalWrite(pin, HIGH);
+}
+//
+// Function to send a pin to a logic low
+void go_0(int pin)
+{
+  pinMode(pin, OUTPUT);
+  digitalWrite(pin, LOW);
+}
+//
+// Function to send a pin to a logic high
+void go_1(int pin)
+{
+  pinMode(pin, OUTPUT);
+  digitalWrite(pin, HIGH);
+}
+// *****************Functions for Keyboard*****************************
+// Function to load the key name into the first available slot
+void load_slot(int key) {
+  if (!slot1)  {
+    slot1 = key;
+  }
+  else if (!slot2) {
+    slot2 = key;
+  }
+  else if (!slot3) {
+    slot3 = key;
+  }
+  else if (!slot4) {
+    slot4 = key;
+  }
+  else if (!slot5) {
+    slot5 = key;
+  }
+  else if (!slot6) {
+    slot6 = key;
+  }
+  if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6)  {
+    slots_full = LOW; // slots are not full
+  }
+  else {
+    slots_full = HIGH; // slots are full
+  } 
+}
+//
+// Function to clear the slot that contains the key name
+void clear_slot(int key) {
+  if (slot1 == key) {
+    slot1 = 0;
+  }
+  else if (slot2 == key) {
+    slot2 = 0;
+  }
+  else if (slot3 == key) {
+    slot3 = 0;
+  }
+  else if (slot4 == key) {
+    slot4 = 0;
+  }
+  else if (slot5 == key) {
+    slot5 = 0;
+  }
+  else if (slot6 == key) {
+    slot6 = 0;
+  }
+  if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6)  {
+    slots_full = LOW; // slots are not full
+  }
+  else {
+    slots_full = HIGH; // slots are full
+  } 
+}
+//
+// Function to load the modifier key name into the appropriate mod variable
+void load_mod(int m_key) {
+  if (m_key == MODIFIERKEY_LEFT_SHIFT)  {
+    mod_shift_l = m_key;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_SHIFT)  {
+    mod_shift_r = m_key;
+  }
+  else if (m_key == MODIFIERKEY_LEFT_CTRL)  {
+    mod_ctrl_l = m_key;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_CTRL)  {
+    mod_ctrl_r = m_key;
+  }
+  else if (m_key == MODIFIERKEY_LEFT_ALT)  {
+    mod_alt_l = m_key;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_ALT)  {
+    mod_alt_r = m_key;
+  }
+  else if (m_key == MODIFIERKEY_GUI)  {
+    mod_gui = m_key;
+  }
+}
+//
+// Function to load 0 into the appropriate mod variable
+void clear_mod(int m_key) {
+  if (m_key == MODIFIERKEY_LEFT_SHIFT)  {
+    mod_shift_l = 0;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_SHIFT)  {
+    mod_shift_r = 0;
+  }
+  else if (m_key == MODIFIERKEY_LEFT_CTRL)  {
+    mod_ctrl_l = 0;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_CTRL)  {
+    mod_ctrl_r = 0;
+  }
+  else if (m_key == MODIFIERKEY_LEFT_ALT)  {
+    mod_alt_l = 0;
+  }
+  else if (m_key == MODIFIERKEY_RIGHT_ALT)  {
+    mod_alt_r = 0;
+  }
+  else if (m_key == MODIFIERKEY_GUI)  {
+    mod_gui = 0;
+  }
+}
+//
+// Function to send the modifier keys over usb
+void send_mod() {
+  Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
+  Keyboard.send_now();
+}
+//
+// Function to send the normal keys in the 6 slots over usb
+void send_normals() {
+  Keyboard.set_key1(slot1);
+  Keyboard.set_key2(slot2);
+  Keyboard.set_key3(slot3);
+  Keyboard.set_key4(slot4);
+  Keyboard.set_key5(slot5);
+  Keyboard.set_key6(slot6);
+  Keyboard.send_now();
+}
+
+//
+//************************************Setup*******************************************
+void setup() {
+// ************keyboard setup
+  for (int a = 0; a < cols_max; a++) {  // loop thru all column pins 
+    go_pu(Col_IO[a]); // set each column pin as an input with a pullup
+  }
+//
+  for (int b = 0; b < rows_max; b++) {  // loop thru all row pins 
+    go_z(Row_IO[b]); // set each row pin as a floating output
+  }  
+//  
+}
+//
+// **********declare and initialize keyboard variables
+boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
+extern volatile uint8_t keyboard_leds; // 8 bits sent from Host to Teensy that give keyboard LED status. 
+//
+//*********************************Main Loop*******************************************
+//
+void loop() {   
+// *************Keyboard Main**************
+// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
+// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
+// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix. 
+// The keyboard keys will read as logic low if they are pressed (negative logic).
+// The old_key matrix also uses negative logic (low=pressed). 
+//
+  for (int x = 0; x < rows_max; x++) {   // loop thru the rows
+    go_0(Row_IO[x]); // Activate Row (send it low)
+    delayMicroseconds(10); // give the row time to go low and settle out
+    for (int y = 0; y < cols_max; y++) {   // loop thru the columns
+// **********Modifier keys
+      if (modifier[x][y] != 0) {  // check if modifier key exists at this location in the array (a non-zero value)
+        if (!digitalRead(Col_IO[y]) && (old_key[x][y])) {  // Read column to see if key is low (pressed) and was previously not pressed
+          if (modifier[x][y] != MODIFIERKEY_FN) {   // Exclude Fn modifier key
+            load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable   
+            send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
+            old_key[x][y] = LOW; // Save state of key as "pressed"
+          }
+          else {
+            Fn_pressed = LOW; // Fn status variable is active low
+            old_key[x][y] = LOW; // old_key state is "pressed" (active low)
+          }
+        }
+        else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) {  //check if key is not pressed and was previously pressed
+          if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key 
+            clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
+            send_mod(); // function sends all mod's over usb including the one that just released
+            old_key[x][y] = HIGH; // Save state of key as "not pressed"
+          }
+          else {
+            Fn_pressed = HIGH; // Fn is no longer active
+            old_key[x][y] = HIGH; // old_key state is "not pressed"
+          }
+        }
+      } 
+// ***********end of modifier section
+//
+// ***********Normal keys section
+      else if (normal[x][y] != 0) {  // check if normal key exists at this location in the array (a non-zero value)
+        if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key pressed and not previously pressed and slots not full
+          old_key[x][y] = LOW; // Save state of key as "pressed"
+          if ((normal[x][y] == KEY_SCROLL_LOCK) && (!Fn_pressed)) { // check for special case of Num Lock Key
+            load_slot(KEY_NUM_LOCK); // update first available slot with Num Lock instead of Scroll Lock
+            send_normals(); // send all slots over USB including the Num Lock Key that just got pressed
+          }
+          else {
+            load_slot(normal[x][y]); //update first available slot with normal key name
+            send_normals(); // send all slots over USB including the key that just got pressed 
+          }
+        }          
+        else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
+          old_key[x][y] = HIGH; // Save state of key as "not pressed"
+          if ((normal[x][y] == KEY_SCROLL_LOCK) && (!Fn_pressed)) { // check for special case of Num Lock Key
+            clear_slot(KEY_NUM_LOCK); // clear the slot that contains Num Lock
+            send_normals(); // send all slots over USB including the Num Lock key
+          }
+          else {
+            clear_slot(normal[x][y]); //clear the slot that contains the normal key name
+            send_normals(); // send all slots over USB including the key that was just released 
+          }
+        }
+      } 
+// **************end of normal section
+//
+// *************Volume key section. Note PJRC states that volume up, down, & mute should be sent with Keyboard.press function. 
+      else if (media[x][y] != 0) {  // check if any volume control key exists at this location in the array (a non-zero value)
+        if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // check if key is pressed and was not previously pressed
+          old_key[x][y] = LOW; // Save state of key as "pressed" 
+          Keyboard.press(media[x][y]); // send volume key press
+        }
+        else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
+          old_key[x][y] = HIGH; // Save state of key as "not pressed" 
+          Keyboard.release(media[x][y]); // send volume key release 
+        }
+      }
+// ***************end of volume section
+    }
+    go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
+  }
+//
+// **********keyboard scan complete
+//
+// *******keyboard LEDs
+// Turn on or off the LED for Caps Lock based on bit 1 from the keyboard_leds variable controlled by the USB host computer
+//
+  if (keyboard_leds & 1<<1) {  // mask off all bits but D1 and test if set
+    go_1(CAPS_LED); // turn on the Caps Lock LED
+  }
+  else {
+    go_0(CAPS_LED); // turn off the Caps Lock LED
+  }
+//
+// ****************End of main loop
+//
+  delay(24); // The overall keyboard scanning rate
+}