Pull commented-out debug lines

This commit is contained in:
Stephen Sweetland 2021-05-10 22:30:06 +01:00
parent 069ce4b967
commit e32e67ff55

View file

@ -300,7 +300,6 @@ void setup() {
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
go_z(Row_IO[b]); // set each row pin as a floating output
}
// Serial.begin(9600);
}
//
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
@ -350,12 +349,6 @@ void loop() {
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key is pressed and was not previously pressed and slots not full
old_key[x][y] = LOW; // Save state of key as "pressed"
// Serial.println("====");
// Serial.println(x);
// Serial.println(y);
// Serial.println(normal[x][y], HEX);
// Serial.println("60..");
// Serial.println(ASCII_60, HEX);
if (Fn_pressed) { // Fn_pressed is active low so it is not pressed and normal key needs to be sent
load_slot(normal[x][y]); //update first available slot with normal key name
send_normals(); // send all slots over USB including the key that just got pressed