432 lines
15 KiB
C++
432 lines
15 KiB
C++
/* Copyright 2018 Frank Adams
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
// The PCB is documented in reply#20 of this post:
|
|
// https://www.eevblog.com/forum/beginners/how-to-connect-to-a-very-very-challanging-blackberry-q10-keyboard-connector/
|
|
#define MODIFIERKEY_FN 0x8f // give Fn key a HID code
|
|
#define CAPS_LED 13 // Teensy LED shows Caps-Lock
|
|
|
|
#define KEY_HASHTILDE 0x32
|
|
#define KEY_KPLEFTPAREN 0xb6 // Keypad {
|
|
#define KEY_KPRIGHTPAREN 0xb7 // Keypad )
|
|
#define KEY_AT 0xce // Keypad @
|
|
#define KEY_EXCL 0xcf // Keypad !
|
|
#define KEY_COLON 0xcb // Keypad :
|
|
#define KEY_APOSTROPHE 0x34
|
|
#define KEY_QQUOTE 0x34
|
|
#define KEY_UNDER 0x01 // _
|
|
#define KEY_QUEST 0x38 // _
|
|
//
|
|
const byte rows_max = 7; // sets the number of rows in the matrix
|
|
const byte cols_max = 5; // sets the number of columns in the matrix
|
|
//
|
|
// Load the normal key matrix with the Teensyduino key names described at www.pjrc.com/teensy/td_keyboard.html
|
|
// A zero indicates no normal key at that location.
|
|
//
|
|
int normal[rows_max][cols_max] = {
|
|
{KEY_Q,KEY_E,KEY_R,KEY_U,KEY_O},
|
|
{KEY_W,KEY_S,KEY_G,KEY_H,KEY_L},
|
|
{0,KEY_D,KEY_T,KEY_Y,KEY_I},
|
|
{KEY_A,KEY_P,0,KEY_ENTER,KEY_BACKSPACE},
|
|
{0,KEY_X,KEY_V,KEY_B,0},
|
|
{KEY_SPACE,KEY_Z,KEY_C,KEY_N,KEY_M},
|
|
{KEY_ESC,0,KEY_F,KEY_J,KEY_K}
|
|
};
|
|
// Load the modifier key matrix with key names at the correct row-column location.
|
|
// A zero indicates no modifier key at that location.
|
|
int modifier[rows_max][cols_max] = {
|
|
{0,0,0,0,0},
|
|
{0,0,0,0,0},
|
|
{MODIFIERKEY_FN,0,0,0,0},
|
|
{0,0,MODIFIERKEY_RIGHT_SHIFT,0,0},
|
|
{MODIFIERKEY_LEFT_ALT,0,0,0,MODIFIERKEY_RIGHT_CTRL},
|
|
{0,0,0,0,0},
|
|
{0,MODIFIERKEY_LEFT_SHIFT,0,0,0}
|
|
};
|
|
// Load the media key matrix with Fn key names at the correct row-column location.
|
|
// A zero indicates no media key at that location.
|
|
int media[rows_max][cols_max] = {
|
|
{KEY_HASHTILDE,KEY_2,KEY_3,KEY_UNDER,KEYPAD_PLUS},
|
|
{KEY_1,KEY_4,KEY_SLASH,KEY_COLON,KEY_QQUOTE},
|
|
{0,KEY_5,KEY_KPLEFTPAREN,KEY_KPRIGHTPAREN,KEY_MINUS},
|
|
{KEYPAD_ASTERIX,KEY_AT,0,0,KEY_DELETE},
|
|
{0,KEY_8,KEY_QUEST,KEY_EXCL,0},
|
|
{0,KEY_7,KEY_9,KEY_COMMA,KEY_PERIOD},
|
|
{KEY_0,0,KEY_6,KEY_SEMICOLON,KEY_QUOTE}
|
|
};
|
|
// Initialize the old_key matrix with one's.
|
|
// 1 = key not pressed, 0 = key is pressed
|
|
boolean old_key[rows_max][cols_max] = {
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1},
|
|
{1,1,1,1,1}
|
|
};
|
|
//
|
|
// Define the Teensy LC I/O numbers (translated from the FPC pin #)
|
|
int Row_IO[rows_max] = {4,6,18,20,21,22,23}; // Teensy LC I/O numbers for rows
|
|
//
|
|
int Col_IO[cols_max] = {5,7,8,17,19}; // Teensy LC I/O numbers for columns
|
|
|
|
// Declare variables that will be used by functions
|
|
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
|
|
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
|
|
int slot1 = 0; //value of 0 means the slot is empty and can be used.
|
|
int slot2 = 0;
|
|
int slot3 = 0;
|
|
int slot4 = 0;
|
|
int slot5 = 0;
|
|
int slot6 = 0;
|
|
//
|
|
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
|
|
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
|
|
int mod_ctrl_l = 0;
|
|
int mod_ctrl_r = 0;
|
|
int mod_alt_l = 0;
|
|
int mod_alt_r = 0;
|
|
int mod_gui = 0;
|
|
//
|
|
// Function to load the key name into the first available slot
|
|
void load_slot(int key) {
|
|
if (!slot1) {
|
|
slot1 = key;
|
|
}
|
|
else if (!slot2) {
|
|
slot2 = key;
|
|
}
|
|
else if (!slot3) {
|
|
slot3 = key;
|
|
}
|
|
else if (!slot4) {
|
|
slot4 = key;
|
|
}
|
|
else if (!slot5) {
|
|
slot5 = key;
|
|
}
|
|
else if (!slot6) {
|
|
slot6 = key;
|
|
}
|
|
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
|
slots_full = LOW; // slots are not full
|
|
}
|
|
else {
|
|
slots_full = HIGH; // slots are full
|
|
}
|
|
}
|
|
//
|
|
// Function to clear the slot that contains the key name
|
|
void clear_slot(int key) {
|
|
if (slot1 == key) {
|
|
slot1 = 0;
|
|
}
|
|
else if (slot2 == key) {
|
|
slot2 = 0;
|
|
}
|
|
else if (slot3 == key) {
|
|
slot3 = 0;
|
|
}
|
|
else if (slot4 == key) {
|
|
slot4 = 0;
|
|
}
|
|
else if (slot5 == key) {
|
|
slot5 = 0;
|
|
}
|
|
else if (slot6 == key) {
|
|
slot6 = 0;
|
|
}
|
|
slots_full = LOW;
|
|
}
|
|
//
|
|
// Function to load the modifier key name into the appropriate mod variable
|
|
void load_mod(int m_key) {
|
|
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
|
mod_shift_l = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
|
mod_shift_r = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
|
mod_ctrl_l = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
|
mod_ctrl_r = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
|
mod_alt_l = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
|
mod_alt_r = m_key;
|
|
}
|
|
else if (m_key == MODIFIERKEY_GUI) {
|
|
mod_gui = m_key;
|
|
}
|
|
}
|
|
//
|
|
// Function to load 0 into the appropriate mod variable
|
|
void clear_mod(int m_key) {
|
|
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
|
mod_shift_l = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
|
mod_shift_r = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
|
mod_ctrl_l = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
|
mod_ctrl_r = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
|
mod_alt_l = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
|
mod_alt_r = 0;
|
|
}
|
|
else if (m_key == MODIFIERKEY_GUI) {
|
|
mod_gui = 0;
|
|
}
|
|
}
|
|
//
|
|
// Function to send the modifier keys over usb
|
|
void send_mod() {
|
|
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
|
|
Keyboard.send_now();
|
|
}
|
|
//
|
|
// Function to send the normal keys in the 6 slots over usb
|
|
void send_normals() {
|
|
Keyboard.set_key1(slot1);
|
|
Keyboard.set_key2(slot2);
|
|
Keyboard.set_key3(slot3);
|
|
Keyboard.set_key4(slot4);
|
|
Keyboard.set_key5(slot5);
|
|
Keyboard.set_key6(slot6);
|
|
Keyboard.send_now();
|
|
}
|
|
//
|
|
// Function to set a pin to high impedance (acts like open drain output)
|
|
void go_z(int pin)
|
|
{
|
|
pinMode(pin, INPUT);
|
|
digitalWrite(pin, HIGH);
|
|
}
|
|
//
|
|
// Function to set a pin as an input with a pullup
|
|
void go_pu(int pin)
|
|
{
|
|
pinMode(pin, INPUT_PULLUP);
|
|
digitalWrite(pin, HIGH);
|
|
}
|
|
//
|
|
// Function to send a pin to a logic low
|
|
void go_0(int pin)
|
|
{
|
|
pinMode(pin, OUTPUT);
|
|
digitalWrite(pin, LOW);
|
|
}
|
|
//
|
|
// Function to send a pin to a logic high
|
|
void go_1(int pin)
|
|
{
|
|
pinMode(pin, OUTPUT);
|
|
digitalWrite(pin, HIGH);
|
|
}
|
|
//
|
|
//----------------------------------Setup-------------------------------------------
|
|
void setup() {
|
|
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
|
|
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
|
|
}
|
|
//
|
|
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
|
|
go_z(Row_IO[b]); // set each row pin as a floating output
|
|
}
|
|
}
|
|
//
|
|
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
|
|
extern volatile uint8_t keyboard_leds; // 8 bits sent from Pi to Teensy that give keyboard LED status. Caps lock is bit D1.
|
|
//
|
|
//---------------------------------Main Loop---------------------------------------------
|
|
//
|
|
void loop() {
|
|
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
|
|
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
|
|
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
|
|
// The keyboard keys will read as logic low if they are pressed (negative logic).
|
|
// The old_key matrix also uses negative logic (low=pressed).
|
|
//
|
|
for (int x = 0; x < rows_max; x++) { // loop thru the rows
|
|
go_0(Row_IO[x]); // Activate Row (send it low)
|
|
delayMicroseconds(10); // give the row time to go low and settle out
|
|
for (int y = 0; y < cols_max; y++) { // loop thru the columns
|
|
// **********Modifier keys including the Fn special case
|
|
if (modifier[x][y] != 0) { // check if modifier key exists at this location in the array (a non-zero value)
|
|
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
|
|
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
|
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
|
|
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
|
|
old_key[x][y] = LOW; // Save state of key as "pressed"
|
|
}
|
|
else {
|
|
Fn_pressed = LOW; // Fn status variable is active low
|
|
old_key[x][y] = LOW; // old_key state is "pressed" (active low)
|
|
}
|
|
}
|
|
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
|
|
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
|
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
|
|
send_mod(); // function sends all mod's over usb including the one that just released
|
|
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
|
}
|
|
else {
|
|
Fn_pressed = HIGH; // Fn is no longer active
|
|
old_key[x][y] = HIGH; // old_key state is "not pressed"
|
|
}
|
|
}
|
|
}
|
|
// ***********end of modifier section
|
|
//
|
|
// ***********Normal keys and media keys in this section
|
|
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
|
|
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // check if key is pressed and was not previously pressed
|
|
old_key[x][y] = LOW; // Save state of key as "pressed"
|
|
if (Fn_pressed) { // Fn_pressed is active low so it is not pressed and normal key needs to be sent
|
|
load_slot(normal[x][y]); //update first available slot with normal key name
|
|
send_normals(); // send all slots over USB including the key that just got pressed
|
|
}
|
|
else if (media[x][y] != 0) { // Fn is pressed so send media if a key exists in the matrix
|
|
if (media[x][y] == KEY_AT) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_2);
|
|
delay(5);
|
|
Keyboard.release(KEY_2);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_HASHTILDE) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_3);
|
|
delay(5);
|
|
Keyboard.release(KEY_3);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_UNDER) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_MINUS);
|
|
delay(5);
|
|
Keyboard.release(KEY_MINUS);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_COLON) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_SEMICOLON);
|
|
delay(5);
|
|
Keyboard.release(KEY_SEMICOLON);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_KPLEFTPAREN) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_9);
|
|
delay(5);
|
|
Keyboard.release(KEY_9);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_KPRIGHTPAREN) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_0);
|
|
delay(5);
|
|
Keyboard.release(KEY_0);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_QUEST) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_SLASH);
|
|
delay(5);
|
|
Keyboard.release(KEY_SLASH);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_EXCL) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_1);
|
|
delay(5);
|
|
Keyboard.release(KEY_1);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else if (media[x][y] == KEY_QQUOTE) {
|
|
Keyboard.press(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
Keyboard.press(KEY_QUOTE);
|
|
delay(5);
|
|
Keyboard.release(KEY_QUOTE);
|
|
delay(5);
|
|
Keyboard.release(MODIFIERKEY_RIGHT_SHIFT);
|
|
delay(5);
|
|
}
|
|
else {
|
|
Keyboard.press(media[x][y]); // media key is sent using keyboard press function per PJRC
|
|
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
|
Keyboard.release(media[x][y]); // send media key release
|
|
}
|
|
}
|
|
}
|
|
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
|
|
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
|
if (Fn_pressed) { // Fn is not pressed
|
|
clear_slot(normal[x][y]); //clear the slot that contains the normal key name
|
|
send_normals(); // send all slots over USB including the key that was just released
|
|
}
|
|
}
|
|
}
|
|
// **************end of normal and media key section
|
|
//
|
|
}
|
|
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
|
|
}
|
|
//
|
|
// **********keyboard scan complete
|
|
//
|
|
// Turn on the LED on the Teensy for Caps Lock based on bit 1 in the keyboard_leds variable controlled by the USB host computer
|
|
//
|
|
if (keyboard_leds & 1<<1) { // mask off all bits but D1 and test if set
|
|
go_1(CAPS_LED); // turn on the LED
|
|
}
|
|
else {
|
|
go_0(CAPS_LED); // turn off the LED
|
|
}
|
|
//
|
|
delay(25); // The overall keyboard scanning rate is about 30ms
|
|
}
|