Add files via upload
This commit is contained in:
Frank Adams
GitHub
parent
f24259f199
commit
5cfd14c053
3 changed files with 1001 additions and 0 deletions
Binary file not shown.
500
GRID 1550/1550_PC_Version.ino
Normal file
500
GRID 1550/1550_PC_Version.ino
Normal file
|
|
@ -0,0 +1,500 @@
|
|||
/* Copyright 2019 Frank Adams
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
// This software implements a GRID 1550 Laptop Keyboard Controller using a Teensy LC
|
||||
// for use with a Windows PC.
|
||||
//
|
||||
// Revision History
|
||||
// Initial Release Dec 12, 2019 - Created from Linux version, uses alt codes for \ and | which are not
|
||||
// compatible with Linux
|
||||
//
|
||||
#define MODIFIERKEY_FN 0x8f // give Fn key a fake HID code
|
||||
#define CAPS_LED 13 // Teensy LED on IO#13 shows Caps-Lock
|
||||
#define NUM_LED 0 // Teensy IO#0 shows Num-Lock (wire to anode of new LED)
|
||||
//
|
||||
const byte rows_max = 11; // sets the number of rows in the matrix
|
||||
const byte cols_max = 13; // sets the number of columns in the matrix
|
||||
//
|
||||
// Load the normal key matrix with the Teensyduino key names
|
||||
// described at www.pjrc.com/teensy/td_keyboard.html
|
||||
// A zero indicates no normal key at that location.
|
||||
int normal[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,KEY_F1,KEY_F2,KEY_F3,KEY_F4,KEY_F5,0,KEY_F9,0},
|
||||
{0,0,0,0,KEY_SPACE,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_ESC,KEY_1,0,KEY_F6,KEY_F7,KEY_F8,KEY_F10,0},
|
||||
{0,0,0,0,0,KEY_TAB,KEY_Q,KEY_W,KEY_2,KEY_3,0,KEY_6,0},
|
||||
{0,0,0,0,0,KEY_CAPS_LOCK,KEY_A,KEY_S,KEY_E,KEY_4,KEY_5,KEY_7,0},
|
||||
{0,0,0,KEY_LEFT,0,0,0,KEY_Z,KEY_F,KEY_D,KEY_8,KEY_9,0},
|
||||
{0,0,0,KEY_DOWN,0,0,KEY_X,KEY_C,KEY_G,KEY_R,KEY_T,KEY_0,0},
|
||||
{0,0,0,KEY_NUM_LOCK,0,KEY_SCROLL_LOCK,KEY_V,KEY_B,KEY_H,KEY_Y,KEY_U,KEY_MINUS,0},
|
||||
{0,0,0,KEY_TILDE,0,KEY_UP,KEY_N,KEY_M,KEY_J,KEY_K,KEY_I,KEY_INSERT,0},
|
||||
{0,0,0,KEY_BACKSLASH,0,KEY_RIGHT_BRACE,KEY_COMMA,KEY_BACKSPACE,KEY_L,KEY_DELETE,KEY_O,KEY_EQUAL,0},
|
||||
{0,0,0,KEY_RIGHT,0,KEY_ENTER,KEY_SLASH,KEY_PERIOD,KEY_QUOTE,KEY_SEMICOLON,KEY_LEFT_BRACE,KEY_P,0}
|
||||
|
||||
};
|
||||
// Load the numlock key matrix with key names at the correct row-column location.
|
||||
// This matrix is the same as the normal matrix except for the number pad keys
|
||||
// A zero indicates no numlock key at that location.
|
||||
int numlock[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,KEY_F1,KEY_F2,KEY_F3,KEY_F4,KEY_F5,0,KEY_F9,0},
|
||||
{0,0,0,0,KEY_SPACE,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_ESC,KEY_1,0,KEY_F6,KEY_F7,KEY_F8,KEY_F10,0},
|
||||
{0,0,0,0,0,KEY_TAB,KEY_Q,KEY_W,KEY_2,KEY_3,0,KEY_6,0},
|
||||
{0,0,0,0,0,KEY_CAPS_LOCK,KEY_A,KEY_S,KEY_E,KEY_4,KEY_5,KEYPAD_7,0},
|
||||
{0,0,0,KEY_LEFT,0,0,0,KEY_Z,KEY_F,KEY_D,KEYPAD_8,KEYPAD_9,0},
|
||||
{0,0,0,KEY_DOWN,0,0,KEY_X,KEY_C,KEY_G,KEY_R,KEY_T,KEYPAD_ASTERIX,0},
|
||||
{0,0,0,KEY_NUM_LOCK,0,KEY_SCROLL_LOCK,KEY_V,KEY_B,KEY_H,KEY_Y,KEYPAD_4,KEY_MINUS,0},
|
||||
{0,0,0,KEY_TILDE,0,KEY_UP,KEY_N,KEY_M,KEYPAD_1,KEYPAD_2,KEYPAD_5,KEY_INSERT,0},
|
||||
{0,0,0,KEY_BACKSLASH,0,KEY_RIGHT_BRACE,KEYPAD_0,KEY_BACKSPACE,KEYPAD_3,KEY_DELETE,KEYPAD_6,KEY_EQUAL,0},
|
||||
{0,0,0,KEY_RIGHT,0,KEY_ENTER,KEYPAD_SLASH,KEYPAD_PERIOD,KEY_QUOTE,KEYPAD_PLUS,KEY_LEFT_BRACE,KEYPAD_MINUS,0}
|
||||
|
||||
};
|
||||
// Load the modifier key matrix with key names at the correct row-column location.
|
||||
// A zero indicates no modifier key at that location.
|
||||
int modifier[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{MODIFIERKEY_LEFT_SHIFT,MODIFIERKEY_FN,MODIFIERKEY_RIGHT_SHIFT,0,0,0,0,0,0,0,0,0,MODIFIERKEY_LEFT_ALT},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,MODIFIERKEY_LEFT_CTRL,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,MODIFIERKEY_RIGHT_ALT,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0}
|
||||
|
||||
};
|
||||
// Load the media key matrix with Fn key names at the correct row-column location.
|
||||
// A zero indicates no media key at that location.
|
||||
int media[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,KEY_HOME,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,KEY_PAGE_DOWN,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_PAUSE,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_PAGE_UP,0,0,0,0,0,KEY_F11,0},
|
||||
{0,0,0,0,0,0,0,0,0,KEY_F12,0,0,0},
|
||||
{0,0,0,KEY_END,0,0,0,0,0,0,0,0,0}
|
||||
|
||||
};
|
||||
// Initialize the old_key matrix with one's.
|
||||
// 1 = key not pressed, 0 = key is pressed
|
||||
boolean old_key[rows_max][cols_max] = {
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1}
|
||||
|
||||
};
|
||||
//
|
||||
// Define the Teensy LC I/O numbers (translated from the FPC pin #)
|
||||
// Row FPC pin # 04,06,08,10,12,14,16,18,20,22,24
|
||||
// Teensy I/O # 01,02,03,04,05,06,07,08,09,10,11
|
||||
int Row_IO[rows_max] = {1,2,3,4,5,6,7,8,9,10,11}; // Teensy LC I/O numbers for rows
|
||||
//
|
||||
// Column FPC pin # 01,03,05,07,09,11,13,15,17,19,21,23,26
|
||||
// Teensy I/O # 23,22,24,21,25,20,19,18,17,16,15,14,12
|
||||
int Col_IO[cols_max] = {23,22,24,21,25,20,19,18,17,16,15,14,12}; // Teensy LC I/O numbers for columns
|
||||
|
||||
// Declare variables that will be used by functions
|
||||
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
|
||||
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
|
||||
int slot1 = 0; //value of 0 means the slot is empty and can be used.
|
||||
int slot2 = 0;
|
||||
int slot3 = 0;
|
||||
int slot4 = 0;
|
||||
int slot5 = 0;
|
||||
int slot6 = 0;
|
||||
//
|
||||
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
|
||||
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
|
||||
int mod_ctrl_l = 0;
|
||||
int mod_ctrl_r = 0;
|
||||
int mod_alt_l = 0;
|
||||
int mod_alt_r = 0;
|
||||
int mod_gui = 0;
|
||||
//
|
||||
// Function to load the key name into the first available slot
|
||||
void load_slot(int key) {
|
||||
if (!slot1) {
|
||||
slot1 = key;
|
||||
}
|
||||
else if (!slot2) {
|
||||
slot2 = key;
|
||||
}
|
||||
else if (!slot3) {
|
||||
slot3 = key;
|
||||
}
|
||||
else if (!slot4) {
|
||||
slot4 = key;
|
||||
}
|
||||
else if (!slot5) {
|
||||
slot5 = key;
|
||||
}
|
||||
else if (!slot6) {
|
||||
slot6 = key;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to clear the slot that contains the key name
|
||||
void clear_slot(int key) {
|
||||
if (slot1 == key) {
|
||||
slot1 = 0;
|
||||
}
|
||||
else if (slot2 == key) {
|
||||
slot2 = 0;
|
||||
}
|
||||
else if (slot3 == key) {
|
||||
slot3 = 0;
|
||||
}
|
||||
else if (slot4 == key) {
|
||||
slot4 = 0;
|
||||
}
|
||||
else if (slot5 == key) {
|
||||
slot5 = 0;
|
||||
}
|
||||
else if (slot6 == key) {
|
||||
slot6 = 0;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load the modifier key name into the appropriate mod variable
|
||||
void load_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = m_key;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load 0 into the appropriate mod variable
|
||||
void clear_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = 0;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to send the modifier keys over usb
|
||||
void send_mod() {
|
||||
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to send the normal keys in the 6 slots over usb
|
||||
void send_normals() {
|
||||
Keyboard.set_key1(slot1);
|
||||
Keyboard.set_key2(slot2);
|
||||
Keyboard.set_key3(slot3);
|
||||
Keyboard.set_key4(slot4);
|
||||
Keyboard.set_key5(slot5);
|
||||
Keyboard.set_key6(slot6);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to set a pin to high impedance (acts like open drain output)
|
||||
void go_z(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to set a pin as an input with a pullup
|
||||
void go_pu(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT_PULLUP);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic low
|
||||
void go_0(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, LOW);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic high
|
||||
void go_1(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
//----------------------------------Setup-------------------------------------------
|
||||
void setup() {
|
||||
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
|
||||
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
|
||||
}
|
||||
//
|
||||
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
|
||||
go_z(Row_IO[b]); // set each row pin as a floating output
|
||||
}
|
||||
}
|
||||
//
|
||||
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
|
||||
extern volatile uint8_t keyboard_leds; // 8 bits sent from Pi to Teensy that give keyboard LED status. Caps lock is bit D1.
|
||||
//
|
||||
//---------------------------------Main Loop---------------------------------------------
|
||||
//
|
||||
void loop() {
|
||||
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
|
||||
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
|
||||
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
|
||||
// The keyboard keys will read as logic low if they are pressed (negative logic).
|
||||
// The old_key matrix also uses negative logic (low=pressed).
|
||||
//
|
||||
for (int x = 0; x < rows_max; x++) { // loop thru the rows
|
||||
go_0(Row_IO[x]); // Activate Row (send it low)
|
||||
delayMicroseconds(10); // give the row time to go low and settle out
|
||||
for (int y = 0; y < cols_max; y++) { // loop thru the columns
|
||||
// **********Modifier keys including the Fn special case
|
||||
if (modifier[x][y] != 0) { // check if modifier key exists
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
if (Fn_pressed) { // only send modifier keys if Fn key is not currently held down
|
||||
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
|
||||
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
}
|
||||
else { // Fn key is already held down so check if right alt key is pressed and send print screen if yes
|
||||
if (modifier[x][y] == MODIFIERKEY_RIGHT_ALT) {
|
||||
Keyboard.press(KEY_PRINTSCREEN);
|
||||
delay(5);
|
||||
Keyboard.release(KEY_PRINTSCREEN);
|
||||
delay(5);
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
Fn_pressed = LOW; // Fn status variable is active low
|
||||
old_key[x][y] = LOW; // old_key state is "pressed" (active low)
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
|
||||
send_mod(); // function sends all mod's over usb including the one that just released
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
}
|
||||
else {
|
||||
Fn_pressed = HIGH; // Fn is no longer active
|
||||
old_key[x][y] = HIGH; // old_key state is "not pressed"
|
||||
}
|
||||
}
|
||||
}
|
||||
// ***********end of modifier section
|
||||
//
|
||||
// ***********Normal keys and media keys in this section
|
||||
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key pressed and not previously pressed and slots not full
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
if (Fn_pressed) { // Fn_pressed is active low so it is not pressed and normal key needs to be sent
|
||||
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||
load_slot(numlock[x][y]); //update first available slot with key name from numlock matrix
|
||||
send_normals(); // send all slots over USB including the key that just got pressed
|
||||
}
|
||||
else {
|
||||
load_slot(normal[x][y]); //update first available slot with key name from normal matrix
|
||||
send_normals(); // send all slots over USB including the key that just got pressed
|
||||
}
|
||||
}
|
||||
else if (media[x][y] != 0) { // Fn is pressed so send media if a key exists in the matrix
|
||||
Keyboard.press(media[x][y]); // media key is sent using keyboard press function per PJRC
|
||||
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||
Keyboard.release(media[x][y]); // send media key release
|
||||
}
|
||||
else if (normal[x][y] == KEY_Z) { // Fn is pressed but no media key so check if KEY_Z is pressed
|
||||
// if using this keyboard on a Raspberry Pi, comment out the following Alt code section and uncomment the unicode section
|
||||
// *******Windows PC Alt Code sequence to give a backslash is Alt 92*******************************
|
||||
Keyboard.press(MODIFIERKEY_LEFT_ALT); // Push and hold Left Alt
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_9); // Push 9
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_9); // Release 9
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_2); // Push 2
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_2); // Release 2
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_ALT); // Release Left Alt
|
||||
delay(5);
|
||||
// *******Raspberry Pi Unicode sequence to give a backslash is Control+Shift+u 5c Enter*****************************
|
||||
/* Keyboard.press(MODIFIERKEY_LEFT_CTRL); // Push and hold Left Control
|
||||
delay(5);
|
||||
Keyboard.press(MODIFIERKEY_LEFT_SHIFT); // Push and hold Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_U); // Push u
|
||||
delay(5);
|
||||
Keyboard.release(KEY_U); // Release u
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_CTRL); // Release Left Control
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_SHIFT); // Release Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_5); // Push 5
|
||||
delay(5);
|
||||
Keyboard.release(KEY_5); // Release 5
|
||||
delay(5);
|
||||
Keyboard.press(KEY_C); // Push c
|
||||
delay(5);
|
||||
Keyboard.release(KEY_C); // Release c
|
||||
delay(5);
|
||||
Keyboard.press(KEY_ENTER); // Push Enter
|
||||
delay(5);
|
||||
Keyboard.release(KEY_ENTER); // Release Enter
|
||||
delay(5);
|
||||
*/
|
||||
}
|
||||
else if (normal[x][y] == KEY_X) { // Fn is pressed but no media key so check if KEY_X is pressed
|
||||
// if using this keyboard on a Raspberry Pi, comment out the following Alt code section and uncomment the unicode section
|
||||
// *******Windows PC Alt Code sequence to give a | is Alt 124*******************************
|
||||
Keyboard.press(MODIFIERKEY_LEFT_ALT); // Push and hold Left Alt
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_1); // Push 1
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_1); // Release 1
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_2); // Push 2
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_2); // Release 2
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_4); // Push 4
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_4); // Release 4
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_ALT); // Release Left Alt
|
||||
delay(5);
|
||||
// *******Raspberry Pi Unicode sequence to give a | is Control+Shift+u 7c Enter*****************************
|
||||
/* Keyboard.press(MODIFIERKEY_LEFT_CTRL); // Push and hold Left Control
|
||||
delay(5);
|
||||
Keyboard.press(MODIFIERKEY_LEFT_SHIFT); // Push and hold Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_U); // Push u
|
||||
delay(5);
|
||||
Keyboard.release(KEY_U); // Release u
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_CTRL); // Release Left Control
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_SHIFT); // Release Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_7); // Push 7
|
||||
delay(5);
|
||||
Keyboard.release(KEY_7); // Release 7
|
||||
delay(5);
|
||||
Keyboard.press(KEY_C); // Push c
|
||||
delay(5);
|
||||
Keyboard.release(KEY_C); // Release c
|
||||
delay(5);
|
||||
Keyboard.press(KEY_ENTER); // Push Enter
|
||||
delay(5);
|
||||
Keyboard.release(KEY_ENTER); // Release Enter
|
||||
delay(5);
|
||||
*/
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
if (Fn_pressed) { // Fn is not pressed
|
||||
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||
clear_slot(numlock[x][y]); //clear slot with key name from numlock matrix
|
||||
send_normals(); // send all slots over USB including the key that just got released
|
||||
}
|
||||
else {
|
||||
clear_slot(normal[x][y]); //clear slot with key name from normal matrix
|
||||
send_normals(); // send all slots over USB including the key that just got released
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// **************end of normal and media key section
|
||||
//
|
||||
}
|
||||
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
|
||||
}
|
||||
//
|
||||
// **********keyboard scan complete
|
||||
//
|
||||
// Turn on the LED on the Teensy for Caps Lock based on bit 1 in the keyboard_leds variable controlled by the USB host computer
|
||||
//
|
||||
if (keyboard_leds & 1<<1) { // mask off all bits but D1 and test if set
|
||||
go_1(CAPS_LED); // turn on the LED
|
||||
}
|
||||
else {
|
||||
go_0(CAPS_LED); // turn off the LED
|
||||
}
|
||||
//
|
||||
// Turn on the LED on the Teensy for Num Lock based on bit 0 in the keyboard_leds variable controlled by the USB host computer
|
||||
//
|
||||
if (keyboard_leds & 1) { // mask off all bits but D0 and test if set
|
||||
go_1(NUM_LED); // turn on the Num Lock LED
|
||||
}
|
||||
else {
|
||||
go_0(NUM_LED); // turn off the Num Lock LED
|
||||
}
|
||||
//
|
||||
delay(25); // The overall keyboard scanning rate is about 30ms
|
||||
}
|
||||
501
GRID 1550/1550_Pi_Version.ino
Normal file
501
GRID 1550/1550_Pi_Version.ino
Normal file
|
|
@ -0,0 +1,501 @@
|
|||
/* Copyright 2019 Frank Adams
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
// This software implements a GRID 1550 Laptop Keyboard Controller using a Teensy LC
|
||||
// for use with a Raspberry Pi or similar Linux computer.
|
||||
//
|
||||
// Revision History
|
||||
// Initial Release Sept 15, 2019
|
||||
// Revision Dec 8, 2019 - Increased delays from 5ms to 25ms for the Alt 92 key codes to give backslash
|
||||
// Revision Dec 11, 2019 - Added Unicode method to give backslash and pipe since Alt codes don't work for Linux
|
||||
//
|
||||
#define MODIFIERKEY_FN 0x8f // give Fn key a fake HID code
|
||||
#define CAPS_LED 13 // Teensy LED on IO#13 shows Caps-Lock
|
||||
#define NUM_LED 0 // Teensy IO#0 shows Num-Lock (wire to anode of new LED)
|
||||
//
|
||||
const byte rows_max = 11; // sets the number of rows in the matrix
|
||||
const byte cols_max = 13; // sets the number of columns in the matrix
|
||||
//
|
||||
// Load the normal key matrix with the Teensyduino key names
|
||||
// described at www.pjrc.com/teensy/td_keyboard.html
|
||||
// A zero indicates no normal key at that location.
|
||||
int normal[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,KEY_F1,KEY_F2,KEY_F3,KEY_F4,KEY_F5,0,KEY_F9,0},
|
||||
{0,0,0,0,KEY_SPACE,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_ESC,KEY_1,0,KEY_F6,KEY_F7,KEY_F8,KEY_F10,0},
|
||||
{0,0,0,0,0,KEY_TAB,KEY_Q,KEY_W,KEY_2,KEY_3,0,KEY_6,0},
|
||||
{0,0,0,0,0,KEY_CAPS_LOCK,KEY_A,KEY_S,KEY_E,KEY_4,KEY_5,KEY_7,0},
|
||||
{0,0,0,KEY_LEFT,0,0,0,KEY_Z,KEY_F,KEY_D,KEY_8,KEY_9,0},
|
||||
{0,0,0,KEY_DOWN,0,0,KEY_X,KEY_C,KEY_G,KEY_R,KEY_T,KEY_0,0},
|
||||
{0,0,0,KEY_NUM_LOCK,0,KEY_SCROLL_LOCK,KEY_V,KEY_B,KEY_H,KEY_Y,KEY_U,KEY_MINUS,0},
|
||||
{0,0,0,KEY_TILDE,0,KEY_UP,KEY_N,KEY_M,KEY_J,KEY_K,KEY_I,KEY_INSERT,0},
|
||||
{0,0,0,KEY_BACKSLASH,0,KEY_RIGHT_BRACE,KEY_COMMA,KEY_BACKSPACE,KEY_L,KEY_DELETE,KEY_O,KEY_EQUAL,0},
|
||||
{0,0,0,KEY_RIGHT,0,KEY_ENTER,KEY_SLASH,KEY_PERIOD,KEY_QUOTE,KEY_SEMICOLON,KEY_LEFT_BRACE,KEY_P,0}
|
||||
|
||||
};
|
||||
// Load the numlock key matrix with key names at the correct row-column location.
|
||||
// This matrix is the same as the normal matrix except for the number pad keys
|
||||
// A zero indicates no numlock key at that location.
|
||||
int numlock[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,KEY_F1,KEY_F2,KEY_F3,KEY_F4,KEY_F5,0,KEY_F9,0},
|
||||
{0,0,0,0,KEY_SPACE,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_ESC,KEY_1,0,KEY_F6,KEY_F7,KEY_F8,KEY_F10,0},
|
||||
{0,0,0,0,0,KEY_TAB,KEY_Q,KEY_W,KEY_2,KEY_3,0,KEY_6,0},
|
||||
{0,0,0,0,0,KEY_CAPS_LOCK,KEY_A,KEY_S,KEY_E,KEY_4,KEY_5,KEYPAD_7,0},
|
||||
{0,0,0,KEY_LEFT,0,0,0,KEY_Z,KEY_F,KEY_D,KEYPAD_8,KEYPAD_9,0},
|
||||
{0,0,0,KEY_DOWN,0,0,KEY_X,KEY_C,KEY_G,KEY_R,KEY_T,KEYPAD_ASTERIX,0},
|
||||
{0,0,0,KEY_NUM_LOCK,0,KEY_SCROLL_LOCK,KEY_V,KEY_B,KEY_H,KEY_Y,KEYPAD_4,KEY_MINUS,0},
|
||||
{0,0,0,KEY_TILDE,0,KEY_UP,KEY_N,KEY_M,KEYPAD_1,KEYPAD_2,KEYPAD_5,KEY_INSERT,0},
|
||||
{0,0,0,KEY_BACKSLASH,0,KEY_RIGHT_BRACE,KEYPAD_0,KEY_BACKSPACE,KEYPAD_3,KEY_DELETE,KEYPAD_6,KEY_EQUAL,0},
|
||||
{0,0,0,KEY_RIGHT,0,KEY_ENTER,KEYPAD_SLASH,KEYPAD_PERIOD,KEY_QUOTE,KEYPAD_PLUS,KEY_LEFT_BRACE,KEYPAD_MINUS,0}
|
||||
|
||||
};
|
||||
// Load the modifier key matrix with key names at the correct row-column location.
|
||||
// A zero indicates no modifier key at that location.
|
||||
int modifier[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{MODIFIERKEY_LEFT_SHIFT,MODIFIERKEY_FN,MODIFIERKEY_RIGHT_SHIFT,0,0,0,0,0,0,0,0,0,MODIFIERKEY_LEFT_ALT},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,MODIFIERKEY_LEFT_CTRL,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,MODIFIERKEY_RIGHT_ALT,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0}
|
||||
|
||||
};
|
||||
// Load the media key matrix with Fn key names at the correct row-column location.
|
||||
// A zero indicates no media key at that location.
|
||||
int media[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,KEY_HOME,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,KEY_PAGE_DOWN,0,0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_PAUSE,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,KEY_PAGE_UP,0,0,0,0,0,KEY_F11,0},
|
||||
{0,0,0,0,0,0,0,0,0,KEY_F12,0,0,0},
|
||||
{0,0,0,KEY_END,0,0,0,0,0,0,0,0,0}
|
||||
|
||||
};
|
||||
// Initialize the old_key matrix with one's.
|
||||
// 1 = key not pressed, 0 = key is pressed
|
||||
boolean old_key[rows_max][cols_max] = {
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1,1,1,1,1,1}
|
||||
|
||||
};
|
||||
//
|
||||
// Define the Teensy LC I/O numbers (translated from the FPC pin #)
|
||||
// Row FPC pin # 04,06,08,10,12,14,16,18,20,22,24
|
||||
// Teensy I/O # 01,02,03,04,05,06,07,08,09,10,11
|
||||
int Row_IO[rows_max] = {1,2,3,4,5,6,7,8,9,10,11}; // Teensy LC I/O numbers for rows
|
||||
//
|
||||
// Column FPC pin # 01,03,05,07,09,11,13,15,17,19,21,23,26
|
||||
// Teensy I/O # 23,22,24,21,25,20,19,18,17,16,15,14,12
|
||||
int Col_IO[cols_max] = {23,22,24,21,25,20,19,18,17,16,15,14,12}; // Teensy LC I/O numbers for columns
|
||||
|
||||
// Declare variables that will be used by functions
|
||||
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
|
||||
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
|
||||
int slot1 = 0; //value of 0 means the slot is empty and can be used.
|
||||
int slot2 = 0;
|
||||
int slot3 = 0;
|
||||
int slot4 = 0;
|
||||
int slot5 = 0;
|
||||
int slot6 = 0;
|
||||
//
|
||||
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
|
||||
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
|
||||
int mod_ctrl_l = 0;
|
||||
int mod_ctrl_r = 0;
|
||||
int mod_alt_l = 0;
|
||||
int mod_alt_r = 0;
|
||||
int mod_gui = 0;
|
||||
//
|
||||
// Function to load the key name into the first available slot
|
||||
void load_slot(int key) {
|
||||
if (!slot1) {
|
||||
slot1 = key;
|
||||
}
|
||||
else if (!slot2) {
|
||||
slot2 = key;
|
||||
}
|
||||
else if (!slot3) {
|
||||
slot3 = key;
|
||||
}
|
||||
else if (!slot4) {
|
||||
slot4 = key;
|
||||
}
|
||||
else if (!slot5) {
|
||||
slot5 = key;
|
||||
}
|
||||
else if (!slot6) {
|
||||
slot6 = key;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to clear the slot that contains the key name
|
||||
void clear_slot(int key) {
|
||||
if (slot1 == key) {
|
||||
slot1 = 0;
|
||||
}
|
||||
else if (slot2 == key) {
|
||||
slot2 = 0;
|
||||
}
|
||||
else if (slot3 == key) {
|
||||
slot3 = 0;
|
||||
}
|
||||
else if (slot4 == key) {
|
||||
slot4 = 0;
|
||||
}
|
||||
else if (slot5 == key) {
|
||||
slot5 = 0;
|
||||
}
|
||||
else if (slot6 == key) {
|
||||
slot6 = 0;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load the modifier key name into the appropriate mod variable
|
||||
void load_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = m_key;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load 0 into the appropriate mod variable
|
||||
void clear_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = 0;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to send the modifier keys over usb
|
||||
void send_mod() {
|
||||
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to send the normal keys in the 6 slots over usb
|
||||
void send_normals() {
|
||||
Keyboard.set_key1(slot1);
|
||||
Keyboard.set_key2(slot2);
|
||||
Keyboard.set_key3(slot3);
|
||||
Keyboard.set_key4(slot4);
|
||||
Keyboard.set_key5(slot5);
|
||||
Keyboard.set_key6(slot6);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to set a pin to high impedance (acts like open drain output)
|
||||
void go_z(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to set a pin as an input with a pullup
|
||||
void go_pu(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT_PULLUP);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic low
|
||||
void go_0(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, LOW);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic high
|
||||
void go_1(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
//----------------------------------Setup-------------------------------------------
|
||||
void setup() {
|
||||
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
|
||||
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
|
||||
}
|
||||
//
|
||||
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
|
||||
go_z(Row_IO[b]); // set each row pin as a floating output
|
||||
}
|
||||
}
|
||||
//
|
||||
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
|
||||
extern volatile uint8_t keyboard_leds; // 8 bits sent from Pi to Teensy that give keyboard LED status. Caps lock is bit D1.
|
||||
//
|
||||
//---------------------------------Main Loop---------------------------------------------
|
||||
//
|
||||
void loop() {
|
||||
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
|
||||
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
|
||||
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
|
||||
// The keyboard keys will read as logic low if they are pressed (negative logic).
|
||||
// The old_key matrix also uses negative logic (low=pressed).
|
||||
//
|
||||
for (int x = 0; x < rows_max; x++) { // loop thru the rows
|
||||
go_0(Row_IO[x]); // Activate Row (send it low)
|
||||
delayMicroseconds(10); // give the row time to go low and settle out
|
||||
for (int y = 0; y < cols_max; y++) { // loop thru the columns
|
||||
// **********Modifier keys including the Fn special case
|
||||
if (modifier[x][y] != 0) { // check if modifier key exists
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
if (Fn_pressed) { // only send modifier keys if Fn key is not currently held down
|
||||
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
|
||||
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
}
|
||||
else { // Fn key is already held down so check if right alt key is pressed and send print screen if yes
|
||||
if (modifier[x][y] == MODIFIERKEY_RIGHT_ALT) {
|
||||
Keyboard.press(KEY_PRINTSCREEN);
|
||||
delay(5);
|
||||
Keyboard.release(KEY_PRINTSCREEN);
|
||||
delay(5);
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
Fn_pressed = LOW; // Fn status variable is active low
|
||||
old_key[x][y] = LOW; // old_key state is "pressed" (active low)
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
|
||||
send_mod(); // function sends all mod's over usb including the one that just released
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
}
|
||||
else {
|
||||
Fn_pressed = HIGH; // Fn is no longer active
|
||||
old_key[x][y] = HIGH; // old_key state is "not pressed"
|
||||
}
|
||||
}
|
||||
}
|
||||
// ***********end of modifier section
|
||||
//
|
||||
// ***********Normal keys and media keys in this section
|
||||
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key pressed and not previously pressed and slots not full
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
if (Fn_pressed) { // Fn_pressed is active low so it is not pressed and normal key needs to be sent
|
||||
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||
load_slot(numlock[x][y]); //update first available slot with key name from numlock matrix
|
||||
send_normals(); // send all slots over USB including the key that just got pressed
|
||||
}
|
||||
else {
|
||||
load_slot(normal[x][y]); //update first available slot with key name from normal matrix
|
||||
send_normals(); // send all slots over USB including the key that just got pressed
|
||||
}
|
||||
}
|
||||
else if (media[x][y] != 0) { // Fn is pressed so send media if a key exists in the matrix
|
||||
Keyboard.press(media[x][y]); // media key is sent using keyboard press function per PJRC
|
||||
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||
Keyboard.release(media[x][y]); // send media key release
|
||||
}
|
||||
else if (normal[x][y] == KEY_Z) { // Fn is pressed but no media key so check if KEY_Z is pressed
|
||||
// if using this keyboard on a Windows PC, uncomment the following Alt code section and comment out the unicode section
|
||||
// *******Windows PC Alt Code sequence to give a backslash is Alt 92*******************************
|
||||
/* Keyboard.press(MODIFIERKEY_LEFT_ALT); // Push and hold Left Alt
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_9); // Push 9
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_9); // Release 9
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_2); // Push 2
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_2); // Release 2
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_ALT); Release Left Alt
|
||||
delay(5);
|
||||
*/
|
||||
// *******Raspberry Pi Unicode sequence to give a backslash is Control+Shift+u 5c Enter*****************************
|
||||
Keyboard.press(MODIFIERKEY_LEFT_CTRL); // Push and hold Left Control
|
||||
delay(5);
|
||||
Keyboard.press(MODIFIERKEY_LEFT_SHIFT); // Push and hold Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_U); // Push u
|
||||
delay(5);
|
||||
Keyboard.release(KEY_U); // Release u
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_CTRL); // Release Left Control
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_SHIFT); // Release Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_5); // Push 5
|
||||
delay(5);
|
||||
Keyboard.release(KEY_5); // Release 5
|
||||
delay(5);
|
||||
Keyboard.press(KEY_C); // Push c
|
||||
delay(5);
|
||||
Keyboard.release(KEY_C); // Release c
|
||||
delay(5);
|
||||
Keyboard.press(KEY_ENTER); // Push Enter
|
||||
delay(5);
|
||||
Keyboard.release(KEY_ENTER); // Release Enter
|
||||
delay(5);
|
||||
}
|
||||
else if (normal[x][y] == KEY_X) { // Fn is pressed but no media key so check if KEY_X is pressed
|
||||
// if using this keyboard on a Windows PC, uncomment the following Alt code section and comment out the unicode section
|
||||
// *******Windows PC Alt Code sequence to give a | is Alt 124*******************************
|
||||
/* Keyboard.press(MODIFIERKEY_LEFT_ALT); // Push and hold Left Alt
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_1); // Push 1
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_1); // Release 1
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_2); // Push 2
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_2); // Release 2
|
||||
delay(5);
|
||||
Keyboard.press(KEYPAD_4); // Push 4
|
||||
delay(5);
|
||||
Keyboard.release(KEYPAD_4); // Release 4
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_ALT); Release Left Alt
|
||||
delay(5);
|
||||
*/
|
||||
// *******Raspberry Pi Unicode sequence to give a | is Control+Shift+u 7c Enter*****************************
|
||||
Keyboard.press(MODIFIERKEY_LEFT_CTRL); // Push and hold Left Control
|
||||
delay(5);
|
||||
Keyboard.press(MODIFIERKEY_LEFT_SHIFT); // Push and hold Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_U); // Push u
|
||||
delay(5);
|
||||
Keyboard.release(KEY_U); // Release u
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_CTRL); // Release Left Control
|
||||
delay(5);
|
||||
Keyboard.release(MODIFIERKEY_LEFT_SHIFT); // Release Left Shift
|
||||
delay(5);
|
||||
Keyboard.press(KEY_7); // Push 7
|
||||
delay(5);
|
||||
Keyboard.release(KEY_7); // Release 7
|
||||
delay(5);
|
||||
Keyboard.press(KEY_C); // Push c
|
||||
delay(5);
|
||||
Keyboard.release(KEY_C); // Release c
|
||||
delay(5);
|
||||
Keyboard.press(KEY_ENTER); // Push Enter
|
||||
delay(5);
|
||||
Keyboard.release(KEY_ENTER); // Release Enter
|
||||
delay(5);
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
if (Fn_pressed) { // Fn is not pressed
|
||||
if (keyboard_leds & 1) { // test if Num Lock is turned on
|
||||
clear_slot(numlock[x][y]); //clear slot with key name from numlock matrix
|
||||
send_normals(); // send all slots over USB including the key that just got released
|
||||
}
|
||||
else {
|
||||
clear_slot(normal[x][y]); //clear slot with key name from normal matrix
|
||||
send_normals(); // send all slots over USB including the key that just got released
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// **************end of normal and media key section
|
||||
//
|
||||
}
|
||||
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
|
||||
}
|
||||
//
|
||||
// **********keyboard scan complete
|
||||
//
|
||||
// Turn on the LED on the Teensy for Caps Lock based on bit 1 in the keyboard_leds variable controlled by the USB host computer
|
||||
//
|
||||
if (keyboard_leds & 1<<1) { // mask off all bits but D1 and test if set
|
||||
go_1(CAPS_LED); // turn on the LED
|
||||
}
|
||||
else {
|
||||
go_0(CAPS_LED); // turn off the LED
|
||||
}
|
||||
//
|
||||
// Turn on the LED on the Teensy for Num Lock based on bit 0 in the keyboard_leds variable controlled by the USB host computer
|
||||
//
|
||||
if (keyboard_leds & 1) { // mask off all bits but D0 and test if set
|
||||
go_1(NUM_LED); // turn on the Num Lock LED
|
||||
}
|
||||
else {
|
||||
go_0(NUM_LED); // turn off the Num Lock LED
|
||||
}
|
||||
//
|
||||
delay(25); // The overall keyboard scanning rate is about 30ms
|
||||
}
|
||||
Loading…
Reference in a new issue