Add files via upload
This commit is contained in:
Frank Adams
GitHub
parent
cccaa471f9
commit
d33e13951b
6 changed files with 703 additions and 0 deletions
BIN
Example_Keyboards/HP_ZV6000/HP Keyboard Matrix.docx
Normal file
BIN
Example_Keyboards/HP_ZV6000/HP Keyboard Matrix.docx
Normal file
Binary file not shown.
405
Example_Keyboards/HP_ZV6000/HP_ZV6000.ino
Normal file
405
Example_Keyboards/HP_ZV6000/HP_ZV6000.ino
Normal file
|
|
@ -0,0 +1,405 @@
|
|||
/* Copyright 2020 Frank Adams
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
// This software implements a HP ZV6000 Laptop Keyboard Controller using a Teensy LC on
|
||||
// a daughterboard with a 24 pin FPC connector. The keyboard has an Italian layout.
|
||||
// This routine uses the Teensyduino "Micro-Manager Method" to send Normal and Modifier
|
||||
// keys over USB. Multi-media keys are sent with keyboard press and release functions.
|
||||
// Description of Teensyduino keyboard functions is at www.pjrc.com/teensy/td_keyboard.html
|
||||
//
|
||||
// Revision History
|
||||
// Original Release Oct 24, 2020
|
||||
// Rev A Oct 25, 2020 - Fixed keys that did not respond
|
||||
//
|
||||
// Compile with tools --> keyboared layout: Italian
|
||||
#define MODIFIERKEY_FN 0x8f // give Fn key a HID code Lock
|
||||
//
|
||||
const byte rows_max = 16; // sets the number of rows in the matrix
|
||||
const byte cols_max = 8; // sets the number of columns in the matrix
|
||||
//
|
||||
// Load the normal key matrix with the Teensyduino key names described at www.pjrc.com/teensy/td_keyboard.html
|
||||
// A zero indicates no normal key at that location.
|
||||
// The Italian vowel grave keys are listed in the LAYOUT_ITALIAN section of the keylayouts.h file located at:
|
||||
// C:\Program Files (x86)\Arduino\hardware\teensy\avr\cores\teensy3
|
||||
//
|
||||
/* Notes from Luigi
|
||||
For a non-US keyboard, look at the file keylayouts.h under the desired language and find the desired key, then use the corresponding US key name.
|
||||
Example for the quote ' character on the Italian keyboard, you will find the quote in the comment
|
||||
#define ASCII_27 KEY_MINUS // 39 '
|
||||
thus, into the normal keys array, where the quote would go, you insert KEY_MINUS
|
||||
Example for the + key on the Italian keyboard, you will find the + in the comment
|
||||
#define ASCII_2B KEY_RIGHT_BRACE // 43 +
|
||||
thus you must use KEY_RIGHT_BRACE where + would go. Do this for all other special keys.
|
||||
The backslash is not listed because it seems it is a unique character but once you know the ASCII code is 92,
|
||||
you can use the US key with the same ASCII code. The tilde key has ASCII code 92.
|
||||
#define ASCII_5C KEY_TILDE // 92.
|
||||
The "less than key" < also known as "angular braces key" doesn't work like the other keys. Using KEY_NON_US_100 did not have any effect on the output.
|
||||
To make it work, this key is intercepted in the code and the correct literal is sent using Keyboard.press().
|
||||
Look at lines 365 to 377 for < and > key coding.
|
||||
*/
|
||||
//
|
||||
int normal[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_F7,KEY_W,KEY_2,KEY_S,KEY_X,KEY_F6,KEY_F5,KEY_F8},
|
||||
{KEY_ESC,KEY_Q,KEY_1,KEY_A,KEY_Z,KEY_TAB,KEY_TILDE,KEY_CAPS_LOCK},
|
||||
{KEY_F4,KEY_E,KEY_3,KEY_D,KEY_C,KEY_F3,KEY_F2,KEY_F1},
|
||||
{KEY_G,KEY_R,KEY_4,KEY_F,KEY_V,KEY_T,KEY_5,KEY_B},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_H,KEY_U,KEY_7,KEY_J,KEY_M,KEY_Y,KEY_6,KEY_N},
|
||||
{KEY_SCROLL_LOCK,KEY_I,KEY_8,KEY_K,KEY_COMMA,KEY_RIGHT_BRACE,KEY_NON_US_100,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,KEY_MENU,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_BACKSPACE,KEY_UP,KEY_DOWN,KEY_ENTER,KEY_SPACE,0,ISO_8859_1_F9,KEY_PAUSE},
|
||||
{KEY_F11,KEY_O,KEY_9,KEY_L,KEY_PERIOD,KEY_F10,KEY_F9,KEY_F12},
|
||||
{ISO_8859_1_E0,KEY_P,KEY_0,ISO_8859_1_F2,KEY_SLASH,ISO_8859_1_E8,KEY_MINUS,ISO_8859_1_EC},
|
||||
{KEY_INSERT,KEY_LEFT,KEY_RIGHT,KEY_PAGE_DOWN,KEY_END,KEY_HOME,KEY_PAGE_UP,KEY_DELETE}
|
||||
};
|
||||
//
|
||||
// Load the modifier key matrix with key names at the correct row-column location.
|
||||
// A zero indicates no modifier key at that location.
|
||||
int modifier[rows_max][cols_max] = {
|
||||
{0,MODIFIERKEY_RIGHT_SHIFT,0,0,MODIFIERKEY_LEFT_SHIFT,0,0,0},
|
||||
{0,0,0,MODIFIERKEY_RIGHT_CTRL,0,MODIFIERKEY_LEFT_CTRL,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,MODIFIERKEY_FN,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{MODIFIERKEY_GUI,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,MODIFIERKEY_LEFT_ALT,0,0,0,0,MODIFIERKEY_RIGHT_ALT},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0}
|
||||
};
|
||||
// Load the media key matrix with Fn key names at the correct row-column location.
|
||||
// A zero indicates no media key at that location.
|
||||
int media[rows_max][cols_max] = {
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_MEDIA_VOLUME_DEC,0,0,0,0,0,0,KEY_MEDIA_VOLUME_INC},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_NUM_LOCK,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,KEY_PRINTSCREEN},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0}
|
||||
};
|
||||
//
|
||||
// Initialize the old_key matrix with one's.
|
||||
// 1 = key not pressed, 0 = key is pressed
|
||||
boolean old_key[rows_max][cols_max] = {
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1}
|
||||
};
|
||||
//
|
||||
// Define the Teensy LC I/O numbers (translated from the FPC pin #)
|
||||
//
|
||||
int Row_IO[rows_max] = {1,21,4,20,19,6,18,7,17,8,16,9,15,10,14,11}; // Teensy LC I/O numbers for rows
|
||||
//
|
||||
int Col_IO[cols_max] = {23,0,22,24,2,3,25,5}; // Teensy LC I/O numbers for columns
|
||||
//
|
||||
// Declare variables that will be used by functions
|
||||
boolean slots_full = LOW; // Goes high when slots 1 thru 6 contain normal keys
|
||||
// slot 1 thru slot 6 hold the normal key values to be sent over USB.
|
||||
int slot1 = 0; //value of 0 means the slot is empty and can be used.
|
||||
int slot2 = 0;
|
||||
int slot3 = 0;
|
||||
int slot4 = 0;
|
||||
int slot5 = 0;
|
||||
int slot6 = 0;
|
||||
//
|
||||
int mod_shift_l = 0; // These variables are sent over USB as modifier keys.
|
||||
int mod_shift_r = 0; // Each is either set to 0 or MODIFIER_ ...
|
||||
int mod_ctrl_l = 0;
|
||||
int mod_ctrl_r = 0;
|
||||
int mod_alt_l = 0;
|
||||
int mod_alt_r = 0;
|
||||
int mod_gui = 0;
|
||||
//
|
||||
// Function to load the key name into the first available slot
|
||||
void load_slot(int key) {
|
||||
if (!slot1) {
|
||||
slot1 = key;
|
||||
}
|
||||
else if (!slot2) {
|
||||
slot2 = key;
|
||||
}
|
||||
else if (!slot3) {
|
||||
slot3 = key;
|
||||
}
|
||||
else if (!slot4) {
|
||||
slot4 = key;
|
||||
}
|
||||
else if (!slot5) {
|
||||
slot5 = key;
|
||||
}
|
||||
else if (!slot6) {
|
||||
slot6 = key;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to clear the slot that contains the key name
|
||||
void clear_slot(int key) {
|
||||
if (slot1 == key) {
|
||||
slot1 = 0;
|
||||
}
|
||||
else if (slot2 == key) {
|
||||
slot2 = 0;
|
||||
}
|
||||
else if (slot3 == key) {
|
||||
slot3 = 0;
|
||||
}
|
||||
else if (slot4 == key) {
|
||||
slot4 = 0;
|
||||
}
|
||||
else if (slot5 == key) {
|
||||
slot5 = 0;
|
||||
}
|
||||
else if (slot6 == key) {
|
||||
slot6 = 0;
|
||||
}
|
||||
if (!slot1 || !slot2 || !slot3 || !slot4 || !slot5 || !slot6) {
|
||||
slots_full = LOW; // slots are not full
|
||||
}
|
||||
else {
|
||||
slots_full = HIGH; // slots are full
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load the modifier key name into the appropriate mod variable
|
||||
void load_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = m_key;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = m_key;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to load 0 into the appropriate mod variable
|
||||
void clear_mod(int m_key) {
|
||||
if (m_key == MODIFIERKEY_LEFT_SHIFT) {
|
||||
mod_shift_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_SHIFT) {
|
||||
mod_shift_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_CTRL) {
|
||||
mod_ctrl_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_CTRL) {
|
||||
mod_ctrl_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_LEFT_ALT) {
|
||||
mod_alt_l = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_RIGHT_ALT) {
|
||||
mod_alt_r = 0;
|
||||
}
|
||||
else if (m_key == MODIFIERKEY_GUI) {
|
||||
mod_gui = 0;
|
||||
}
|
||||
}
|
||||
//
|
||||
// Function to send the modifier keys over usb
|
||||
void send_mod() {
|
||||
Keyboard.set_modifier(mod_shift_l | mod_shift_r | mod_ctrl_l | mod_ctrl_r | mod_alt_l | mod_alt_r | mod_gui);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to send the normal keys in the 6 slots over usb
|
||||
void send_normals() {
|
||||
Keyboard.set_key1(slot1);
|
||||
Keyboard.set_key2(slot2);
|
||||
Keyboard.set_key3(slot3);
|
||||
Keyboard.set_key4(slot4);
|
||||
Keyboard.set_key5(slot5);
|
||||
Keyboard.set_key6(slot6);
|
||||
Keyboard.send_now();
|
||||
}
|
||||
//
|
||||
// Function to set a pin to high impedance (acts like open drain output)
|
||||
void go_z(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to set a pin as an input with a pullup
|
||||
void go_pu(int pin)
|
||||
{
|
||||
pinMode(pin, INPUT_PULLUP);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic low
|
||||
void go_0(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, LOW);
|
||||
}
|
||||
//
|
||||
// Function to send a pin to a logic high
|
||||
void go_1(int pin)
|
||||
{
|
||||
pinMode(pin, OUTPUT);
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
//
|
||||
//----------------------------------Setup-------------------------------------------
|
||||
void setup() {
|
||||
|
||||
for (int a = 0; a < cols_max; a++) { // loop thru all column pins
|
||||
go_pu(Col_IO[a]); // set each column pin as an input with a pullup
|
||||
}
|
||||
//
|
||||
for (int b = 0; b < rows_max; b++) { // loop thru all row pins
|
||||
go_z(Row_IO[b]); // set each row pin as a floating output
|
||||
}
|
||||
}
|
||||
//
|
||||
boolean Fn_pressed = HIGH; // Initialize Fn key to HIGH = "not pressed"
|
||||
// extern volatile uint8_t keyboard_leds; // 8 bits sent from Pi to Teensy that give keyboard LED status. Caps lock is bit D1.
|
||||
//
|
||||
//---------------------------------Main Loop---------------------------------------------
|
||||
//
|
||||
void loop() {
|
||||
// Scan keyboard matrix with an outer loop that drives each row low and an inner loop that reads every column (with pull ups).
|
||||
// The routine looks at each key's present state (by reading the column input pin) and also the previous state from the last scan
|
||||
// that was 30msec ago. The status of a key that was just pressed or just released is sent over USB and the state is saved in the old_key matrix.
|
||||
// The keyboard keys will read as logic low if they are pressed (negative logic).
|
||||
// The old_key matrix also uses negative logic (low=pressed).
|
||||
//
|
||||
for (int x = 0; x < rows_max; x++) { // loop thru the rows
|
||||
go_0(Row_IO[x]); // Activate Row (send it low)
|
||||
delayMicroseconds(10); // give the row time to go low and settle out
|
||||
for (int y = 0; y < cols_max; y++) { // loop thru the columns
|
||||
// **********Modifier keys including the Fn special case
|
||||
if (modifier[x][y] != 0) { // check if modifier key exists at this location in the array (a non-zero value)
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y])) { // Read column to see if key is low (pressed) and was previously not pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
load_mod(modifier[x][y]); // function reads which modifier key is pressed and loads it into the appropriate mod_... variable
|
||||
send_mod(); // function sends the state of all modifier keys over usb including the one that just got pressed
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
}
|
||||
else {
|
||||
Fn_pressed = LOW; // Fn status variable is active low
|
||||
old_key[x][y] = LOW; // old_key state is "pressed" (active low)
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed and was previously pressed
|
||||
if (modifier[x][y] != MODIFIERKEY_FN) { // Exclude Fn modifier key
|
||||
clear_mod(modifier[x][y]); // function reads which modifier key was released and loads 0 into the appropriate mod_... variable
|
||||
send_mod(); // function sends all mod's over usb including the one that just released
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
}
|
||||
else {
|
||||
Fn_pressed = HIGH; // Fn is no longer active
|
||||
old_key[x][y] = HIGH; // old_key state is "not pressed"
|
||||
}
|
||||
}
|
||||
}
|
||||
// ***********end of modifier section
|
||||
//
|
||||
// ***********Normal keys and media keys in this section
|
||||
else if ((normal[x][y] != 0) || (media[x][y] != 0)) { // check if normal or media key exists at this location in the array
|
||||
if (!digitalRead(Col_IO[y]) && (old_key[x][y]) && (!slots_full)) { // check if key is pressed and was not previously pressed and slots not full
|
||||
old_key[x][y] = LOW; // Save state of key as "pressed"
|
||||
if (Fn_pressed) { // Fn_pressed is active low so it is not pressed and normal key needs to be sent
|
||||
// **** SPECIAL for < and > which are not supported ****
|
||||
// If the < key is pressed and also one between left or right shift is pressed
|
||||
if(normal[x][y] == KEY_NON_US_100 && (mod_shift_l == MODIFIERKEY_LEFT_SHIFT || mod_shift_r == MODIFIERKEY_RIGHT_SHIFT)) {
|
||||
Keyboard.press('>'); // > literal is sent using keyboard press function
|
||||
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||
Keyboard.release('>'); // send key release
|
||||
}
|
||||
// If only < is pressed
|
||||
else if (normal[x][y] == KEY_NON_US_100) {
|
||||
Keyboard.press('<'); // < literal is sent using keyboard press function
|
||||
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||
Keyboard.release('<'); // send key release
|
||||
}
|
||||
// All the other normal keys
|
||||
else {
|
||||
load_slot(normal[x][y]); //update first available slot with normal key name
|
||||
send_normals(); // send all slots over USB including the key that just got pressed
|
||||
}
|
||||
}
|
||||
else if (media[x][y] != 0) { // Fn is pressed so send media if a key exists in the matrix
|
||||
Keyboard.press(media[x][y]); // media key is sent using keyboard press function per PJRC
|
||||
delay(5); // delay 5 milliseconds before releasing to make sure it gets sent over USB
|
||||
Keyboard.release(media[x][y]); // send media key release
|
||||
}
|
||||
}
|
||||
else if (digitalRead(Col_IO[y]) && (!old_key[x][y])) { //check if key is not pressed, but was previously pressed
|
||||
old_key[x][y] = HIGH; // Save state of key as "not pressed"
|
||||
if (Fn_pressed) { // Fn is not pressed
|
||||
clear_slot(normal[x][y]); //clear the slot that contains the normal key name
|
||||
send_normals(); // send all slots over USB including the key that was just released
|
||||
}
|
||||
}
|
||||
}
|
||||
// **************end of normal and media key section
|
||||
}
|
||||
go_z(Row_IO[x]); // De-activate Row (send it to hi-z)
|
||||
}
|
||||
//
|
||||
// **********keyboard scan complete
|
||||
delay(25); // The overall keyboard scanning rate is about 30ms
|
||||
}
|
||||
BIN
Example_Keyboards/HP_ZV6000/Keyboard pic.jpg
Normal file
BIN
Example_Keyboards/HP_ZV6000/Keyboard pic.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 2.8 MiB |
|
|
@ -0,0 +1,94 @@
|
|||
MODIFIERKEY_LEFT_CTRL 7 8
|
||||
MODIFIERKEY_RIGHT_CTRL 5 7
|
||||
MODIFIERKEY_LEFT_SHIFT 6 4
|
||||
MODIFIERKEY_RIGHT_SHIFT 2 4
|
||||
MODIFIERKEY_LEFT_ALT 3 20
|
||||
MODIFIERKEY_RIGHT_ALT 12 20
|
||||
MODIFIERKEY_GUI 1 18
|
||||
KEY_A 5 11
|
||||
KEY_B 12 14
|
||||
KEY_C 6 13
|
||||
KEY_D 5 13
|
||||
KEY_E 2 13
|
||||
KEY_F 5 14
|
||||
KEY_G 1 14
|
||||
KEY_H 1 16
|
||||
KEY_I 2 17
|
||||
KEY_J 5 16
|
||||
KEY_K 5 17
|
||||
KEY_L 5 22
|
||||
KEY_M 6 16
|
||||
KEY_N 12 16
|
||||
KEY_O 2 22
|
||||
KEY_P 2 23
|
||||
KEY_Q 2 11
|
||||
KEY_R 2 14
|
||||
KEY_S 5 10
|
||||
KEY_T 8 14
|
||||
KEY_U 2 16
|
||||
KEY_V 14 6
|
||||
KEY_W 10 2
|
||||
KEY_X 6 10
|
||||
KEY_Y 8 16
|
||||
KEY_Z 6 11
|
||||
KEY_1 3 11
|
||||
KEY_2 10 3
|
||||
KEY_3 3 13
|
||||
KEY_4 3 14
|
||||
KEY_5 9 14
|
||||
KEY_6 9 16
|
||||
KEY_7 3 16
|
||||
KEY_8 3 17
|
||||
KEY_9 3 22
|
||||
KEY_0 3 23
|
||||
KEY_BACKSPACE 1 21
|
||||
KEY_ESC 11 1
|
||||
KEY_F1 12 13
|
||||
KEY_F2 9 13
|
||||
KEY_F3 13 8
|
||||
KEY_F4 13 10
|
||||
KEY_F5 9 10
|
||||
KEY_F6 8 10
|
||||
KEY_F7 1 10
|
||||
KEY_F8 10 12
|
||||
KEY_F9 9 22
|
||||
KEY_F10 22 8
|
||||
KEY_F11 22 1
|
||||
KEY_F12 12 22
|
||||
KEY_DELETE 12 24
|
||||
KEY_PAGE_UP 9 24
|
||||
KEY_PAGE_DOWN 5 24
|
||||
KEY_END 24 6
|
||||
KEY_RIGHT 3 24
|
||||
KEY_LEFT 2 24
|
||||
KEY_UP 2 21
|
||||
KEY_DOWN 21 3
|
||||
KEY_MENU 9 19
|
||||
KEY_PERIOD 6 22
|
||||
KEY_COMMA 6 17
|
||||
KEY_ENTER 21 5
|
||||
KEY_CAPS_LOCK 11 12
|
||||
KEY_TAB 8 11
|
||||
KEY_SPACE 6 21
|
||||
KEY_HOME 8 24
|
||||
KEY_INSERT 1 24
|
||||
MODIFIERKEY_FN 9 15
|
||||
|
||||
WORKING
|
||||
ALL KEYS ABOVE
|
||||
CTRL/SHIFT/ALT COMBINATIONS
|
||||
|
||||
NOT WORKING
|
||||
FN COMBINATIONS
|
||||
\ 9 11
|
||||
- 6 23
|
||||
ò 5 23
|
||||
à 1 23
|
||||
ù 9 21
|
||||
è 8 23
|
||||
+ 8 17
|
||||
< 9 17
|
||||
' 9 23
|
||||
ì 12 23
|
||||
SCORR 1 17
|
||||
PAUSA 12 21
|
||||
98
Example_Keyboards/HP_ZV6000/Keyboard_without_number_pad.txt
Normal file
98
Example_Keyboards/HP_ZV6000/Keyboard_without_number_pad.txt
Normal file
|
|
@ -0,0 +1,98 @@
|
|||
MODIFIERKEY_LEFT_CTRL 7 8
|
||||
MODIFIERKEY_RIGHT_CTRL 5 7
|
||||
MODIFIERKEY_LEFT_SHIFT 6 4
|
||||
MODIFIERKEY_RIGHT_SHIFT 2 4
|
||||
MODIFIERKEY_LEFT_ALT 3 20
|
||||
MODIFIERKEY_RIGHT_ALT 12 20
|
||||
MODIFIERKEY_GUI 1 18
|
||||
MODIFIERKEY_FN 9 15
|
||||
KEY_A 5 11
|
||||
KEY_B 12 14
|
||||
KEY_C 6 13
|
||||
KEY_D 5 13
|
||||
KEY_E 2 13
|
||||
KEY_F 5 14
|
||||
KEY_G 1 14
|
||||
KEY_H 1 16
|
||||
KEY_I 2 17
|
||||
KEY_J 5 16
|
||||
KEY_K 5 17
|
||||
KEY_L 5 22
|
||||
KEY_M 6 16
|
||||
KEY_N 12 16
|
||||
KEY_O 2 22
|
||||
KEY_P 2 23
|
||||
KEY_Q 2 11
|
||||
KEY_R 2 14
|
||||
KEY_S 5 10
|
||||
KEY_T 8 14
|
||||
KEY_U 2 16
|
||||
KEY_V 14 6
|
||||
KEY_W 10 2
|
||||
KEY_X 6 10
|
||||
KEY_Y 8 16
|
||||
KEY_Z 6 11
|
||||
KEY_1 3 11
|
||||
KEY_2 10 3
|
||||
KEY_3 3 13
|
||||
KEY_4 3 14
|
||||
KEY_5 9 14
|
||||
KEY_6 9 16
|
||||
KEY_7 3 16
|
||||
KEY_8 3 17
|
||||
KEY_9 3 22
|
||||
KEY_0 3 23
|
||||
KEY_MINUS 6 23
|
||||
KEY_BACKSPACE 1 21
|
||||
KEY_ESC 11 1
|
||||
KEY_F1 12 13
|
||||
KEY_F2 9 13
|
||||
KEY_F3 13 8
|
||||
KEY_F4 13 1
|
||||
KEY_F5 9 10
|
||||
KEY_F6 8 10
|
||||
KEY_F7 1 10
|
||||
KEY_F8 10 12
|
||||
KEY_F9 9 22
|
||||
KEY_F10 22 8
|
||||
KEY_F11 22 1
|
||||
KEY_F12 12 22
|
||||
KEY_INSERT 1 24
|
||||
KEY_DELETE 12 24
|
||||
KEY_HOME 8 24
|
||||
KEY_PAGE_UP 9 24
|
||||
KEY_PAGE_DOWN 5 24
|
||||
KEY_END 24 6
|
||||
KEY_RIGHT 3 24
|
||||
KEY_LEFT 2 24
|
||||
KEY_UP 2 21
|
||||
KEY_DOWN 21 3
|
||||
KEY_MENU 9 19
|
||||
KEY_SLASH
|
||||
KEY_PERIOD 6 22
|
||||
KEY_COMMA 6 17
|
||||
KEY_SEMICOLON
|
||||
KEY_QUOTE 9 23
|
||||
KEY_ENTER 21 5
|
||||
KEY_LEFT_BRACE
|
||||
KEY_RIGHT_BRACE
|
||||
KEY_BACKSLASH 11 9
|
||||
KEY_CAPS_LOCK 11 12
|
||||
KEY_TAB 8 11
|
||||
KEY_SPACE 6 21
|
||||
KEY_PRINTSCREEN
|
||||
KEY_NUM_LOCK 17 1
|
||||
KEY_MEDIA_PLAY FN
|
||||
KEY_MEDIA_PAUSE FN
|
||||
KEY_MEDIA_RECORD FN
|
||||
KEY_MEDIA_STOP FN
|
||||
KEY_MEDIA_REWIND FN
|
||||
KEY_MEDIA_FAST_FORWARD FN
|
||||
KEY_MEDIA_PREV_TRACK FN
|
||||
KEY_MEDIA_NEXT_TRACK FN
|
||||
KEY_MEDIA_VOLUME_DEC FN
|
||||
KEY_MEDIA_VOLUME_INC FN
|
||||
KEY_MEDIA_PLAY_PAUSE FN
|
||||
KEY_MEDIA_PLAY_SKIP FN
|
||||
KEY_MEDIA_MUTE FN
|
||||
KEY_MEDIA_EJECT FN
|
||||
106
Example_Keyboards/HP_ZV6000/python_results_LC
Normal file
106
Example_Keyboards/HP_ZV6000/python_results_LC
Normal file
|
|
@ -0,0 +1,106 @@
|
|||
initial outputpin:7
|
||||
-----------------------------------------------------
|
||||
Results:
|
||||
-----------------------------------------------------
|
||||
FPC PINS:
|
||||
|
||||
8 inputpins:
|
||||
[1, 2, 3, 5, 6, 8, 9, 12]
|
||||
|
||||
16 outputpins:
|
||||
[4, 7, 10, 11, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24]
|
||||
-----------------------------------------------------
|
||||
TEENSY PINS (these have to be copied to the arduino file):
|
||||
|
||||
8 inputpins:
|
||||
[23, 0, 22, 24, 2, 3, 25, 5]
|
||||
|
||||
16 outputpins:
|
||||
[1, 21, 4, 20, 19, 6, 18, 7, 17, 8, 16, 9, 15, 10, 14, 11]
|
||||
-----------------------------------------------------
|
||||
Copy these matrices into the Arduino USB Controller code
|
||||
|
||||
-----------------------------------------------------
|
||||
KEY
|
||||
-----------------------------------------------------
|
||||
{
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_F7,KEY_W,KEY_2,KEY_S,KEY_X,KEY_F6,KEY_F5,KEY_F8},
|
||||
{KEY_ESC,KEY_Q,KEY_1,KEY_A,KEY_Z,KEY_TAB,KEY_BACKSLASH,KEY_CAPS_LOCK},
|
||||
{KEY_F4,KEY_E,KEY_3,KEY_D,KEY_C,KEY_F3,KEY_F2,KEY_F1},
|
||||
{KEY_G,KEY_R,KEY_4,KEY_F,KEY_V,KEY_T,KEY_5,KEY_B},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_H,KEY_U,KEY_7,KEY_J,KEY_M,KEY_Y,KEY_6,KEY_N},
|
||||
{KEY_NUM_LOCK,KEY_I,KEY_8,KEY_K,KEY_COMMA,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,KEY_MENU,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{KEY_BACKSPACE,KEY_UP,KEY_DOWN,KEY_ENTER,KEY_SPACE,0,0,0},
|
||||
{KEY_F11,KEY_O,KEY_9,KEY_L,KEY_PERIOD,KEY_F10,KEY_F9,KEY_F12},
|
||||
{0,KEY_P,KEY_0,0,KEY_MINUS,0,KEY_QUOTE,0},
|
||||
{KEY_INSERT,KEY_LEFT,KEY_RIGHT,KEY_PAGE_DOWN,KEY_END,KEY_HOME,KEY_PAGE_UP,KEY_DELETE},
|
||||
}
|
||||
-----------------------------------------------------
|
||||
MODIFIER
|
||||
-----------------------------------------------------
|
||||
{
|
||||
{0,MODIFIERKEY_RIGHT_SHIFT,0,0,MODIFIERKEY_LEFT_SHIFT,0,0,0},
|
||||
{0,0,0,MODIFIERKEY_RIGHT_CTRL,0,MODIFIERKEY_LEFT_CTRL,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,MODIFIERKEY_FN,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{MODIFIERKEY_GUI,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,MODIFIERKEY_LEFT_ALT,0,0,0,0,MODIFIERKEY_RIGHT_ALT},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
}
|
||||
-----------------------------------------------------
|
||||
FN
|
||||
-----------------------------------------------------
|
||||
{
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
{0,0,0,0,0,0,0,0},
|
||||
}
|
||||
-----------------------------------------------------
|
||||
ONE
|
||||
-----------------------------------------------------
|
||||
{
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
{1,1,1,1,1,1,1,1},
|
||||
}
|
||||
Loading…
Reference in a new issue